Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony service facility.
| Symptom | Remedy | |
|
|
| |
| The ?/1 (on/standby) | • Connect the mains lead to the mains securely. | |
| switch does not function. |
| |
|
|
| |
Power | The power is turned on | • Moisture condensation has occurred. Turn the power off, | |
but the VCR does not | unplug the mains lead and leave the VCR to dry for over | ||
| |||
| operate. | three hours. | |
|
|
| |
| The VCR is plugged in | • Set POWER SAVE in the USER SET menu to OFF (see | |
| but the display window | ||
| remains dark. |
| |
|
|
| |
Clock | The clock has stopped | • The clock stops if the VCR is disconnected from the mains. | |
the display window. | Reset the clock (and timer). | ||
| and “– | ||
|
|
| |
| The playback picture | • Make sure the TV is set to the video channel. If you are | |
| does not appear on the | using a monitor, set it to video input. | |
| TV screen. | • If the VCR is connected to the TV with the Scart cable, | |
|
| make sure the VIDEO indicator is lit in the display | |
|
| window. Use the t TV/VIDEO button on the remote | |
|
| commander to light up the VIDEO indicator. | |
|
|
| |
| The picture is not clear. | • Existing broadcasts may interfere with the VCR. Reset the | |
|
| RF channel output of your VCR (see page 22). | |
|
| • Adjust the tracking with the PROGRAM +/– buttons on the | |
|
| VCR. | |
|
| • The video heads are dirty (see the last page of | |
Playback |
| Troubleshooting). Clean the video heads using a Sony | |
| video head cleaning cassette. If a Sony cleaning cassette is | ||
|
| ||
|
| not available in your area, have the heads cleaned at your | |
|
| nearest Sony service facility (a standard service charge will | |
|
| be required). Do not use a commercially available liquid | |
|
| type cleaning cassette other than Sony’s, as it may damage | |
|
| the video heads. | |
|
| • The video heads may have to be replaced. Consult your | |
|
| local Sony service facility for more information. | |
|
|
| |
| The picture has no | • The COLOUR SYSTEM option in the USER SET menu is | |
| colour. | set to the wrong position. Set the option to conform to the | |
|
| system that the tape was recorded in. | |
|
|
| |
| The picture rolls | • Adjust the vertical hold control on the TV or monitor. | |
| vertically during picture |
| |
| search. |
| |
|
|
|
76Troubleshooting