6
OK
Press M/m/</, to select the appropriate TV system, then press OK.
The VCR starts searching for all of the receivable channels and presets them (in the appropriate order for your local area).
AUTO SET UP
PLEASE WAIT
4 0 %
EXIT : MENU
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme positions” on page 31.
After the search or download is complete, the current time appears for any stations that transmit a time signal. If the time does not appear, set the clock manually. See “Setting the clock” on page 24.
For
The clock setting menu appears. See “Setting the clock” on page 24.
To cancel the Auto Set Up function
Press MENU.
To change the RF channel
If the picture does not appear clearly on the TV, change the RF channel on the VCR and TV. Select INSTALLATION from the menu, then press M/m to highlight VCR OUTPUT CH and press ,. Select the RF channel by pressing the M/m buttons. Then, tune the TV to the new RF channel so that a clear picture appears.
Tip
•If you want to change the language for the
Notes
•Whenever you operate the Auto Set Up function, some of the settings (ShowView*, timer, etc.) will be reset. If this happens, you have to set them again.
•Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the VCR.
•After using the Auto Set Up function, the language abbreviations do not appear automatically when you connect the mains lead again. If you want to use the Auto Set Up function again, press MENU, then press M/m/</, to highlight INSTALLATION and press OK. Press M/m to highlight AUTO SET UP, then repeat all procedures from step 4.
•Auto preset can be performed by pressing x (stop) on the VCR continuously for 5 seconds or more with no tape inserted.
* not available on
22Setting up the VCR with the Auto Set Up function