Specifications

System

Channel coverage PAL (B/G, D/K)

VHF E2–E12, R1–R12 UHF E21–E69, R21–R69 CATV S1–S41, S01–S05

RF output signal

UHF channels 21–69 Aerial out

75-ohm asymmetrical aerial socket Tape speed

SP: PAL/MESECAM

23.39mm/s

(recording/playback)

NTSC 33.35 mm/s (playback only)

LP: PAL/MESECAM

11.70mm/s

(recording/playback)

NTSC 16.67 mm/s (playback only)

EP: NTSC 11.12 mm/s (playback only)

Maximum recording/playback time

10 hrs. in LP mode (with E300 tape) Rewind time

Approx. 1 min. (with E180 tape)

Inputs and outputs

LINE-1 (EURO AV) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3

LINE-2 (DEC/EXT)/LINE-3 (DEC/EXT) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

tLINE-2 L o R*1

VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2) Input level: 327 mVrms

Input impedance: more than 47 kilohms

AUDIO (OUT/SORTIE) R/D L/G*2 Phono jack (2)

Rated output level: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms *1 SLV-SE840N only

*2 not available on SLV-SE640N and SE440K

General

Power requirements

220 – 240 V AC, 50 Hz Power consumption

•SLV-SE440K 15 W

1.2W (POWER SAVE is set to ECO2, minimum)

•SLV-SE640N 17 W

1.2W (POWER SAVE is set to ECO2, minimum)

•SLV-SE840N, SE740N and SX740N 17 W

1.3W (POWER SAVE is set to ECO2, minimum)

Operating temperature 5° C to 40° C

Storage temperature –20°C to 60° C

82Specifications