5 |
| PROGRAM | Press PROGRAM +/– (repeatedly) to select the appropriate TV | ||
| |||||
|
|
| system for your area. Select “G” for the B/G TV system, or “K” for | ||
|
|
| the D/K TV system. |
|
|
|
|
|
|
|
|
6 |
|
| Tune the TV to the same channel as that |
|
|
|
| ||||
|
|
| shown in the display window so that | SONY VIDEO CASSETTE RECORDER |
|
|
|
| the picture on the right appears clearly |
|
|
|
|
| on the TV screen. |
|
|
|
|
| Refer to your TV manual for tuning |
|
|
|
|
| instructions. |
|
|
|
|
| If you select the wrong TV system in |
|
|
|
|
|
|
| |
|
|
| step 5, the picture on the right may not |
|
|
|
|
| appear. Select the appropriate TV |
|
|
|
|
| system and tune the TV again. |
|
|
|
|
| If the picture does not appear clearly, |
|
|
|
|
| see “To obtain a clear picture from the |
|
|
|
|
| VCR” below. |
|
|
|
|
|
|
|
|
7 |
|
| Press RF CHANNEL. |
|
|
| RF CHANNEL | You have now tuned your TV to the VCR. Whenever you want to | |||
|
|
|
| ||
play a tape, set the TV to the video channel.
Started Getting
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears.
Note
• If you set the wrong TV system, you may have no sound or sound may be distorted.
Getting Started 15