Tips

You can store information for up to 24 programmes on a single list.

While recording, you can display the SMART SEARCH screen using the

SMART SEARCH button. If you decide to stop recording, press SMART SEARCH to make the SMART SEARCH screen disappear first. Then press pSTOP.

Notes

If you begin recording a programme “D” from the middle of a previously recorded programme “A” and into another previously recorded programme “B,” the Smart Search information for the second programme “B” which is recorded over is deleted.

Originally recorded programmes

ABC

Recording the programme “D” over the programme “A” and “B”

ADC

You cannot use this function unless the clock is set.

Depending on the tape, the total or remaining time may not appear correctly.

When recording a short programme (less than 10 minutes in SP mode, or 20 minutes in LP mode), the Smart Search function may not be available or the programme information may not appear. Also, if you record a long programme directly after a short programme, the Smart Search information for the short programme may be deleted.

Blank space is measured from the end of the last recorded programme to the end of the tape. However, if you eject the tape then make a new recording on the same tape, the original recorded programme(s) is displayed as a blank space.

If no information is stored in the VCR’s memory, LATEST DATA does not appear in the SMART SEARCH screen.

Additional Operations 51