5

 

 

PROGRAM

Press PROGRAM +/– (repeatedly) to select the appropriate TV

 

 

 

 

 

system for your area. Select “G” for the B/G TV system, or “K” for

 

 

 

 

 

 

 

 

the D/K TV system.

 

 

 

 

 

 

 

6

 

 

 

Tune the TV to the same channel

 

 

 

 

 

 

 

 

 

 

shown in the VCR display window

 

 

 

 

 

 

SONY VIDEO CASSETTE RECORDER

 

 

 

 

 

so that the picture on the right

 

 

 

 

 

 

 

 

 

 

 

appears clearly on the TV screen.

 

 

 

 

 

 

Refer to your TV manual for TV

 

 

 

 

 

 

tuning instructions.

 

 

 

 

 

 

If you select the wrong TV system

 

 

 

 

 

 

 

 

 

 

 

 

in step 5, the picture on the right

 

 

 

 

may not appear. Select the appropriate TV system and tune the TV

 

 

 

 

again.

 

 

 

 

If the picture does not appear clearly, see “To obtain a clear picture

 

 

 

 

from the VCR” below.

 

 

 

 

 

 

 

7

AUTO SET UP

Press RF CHANNEL.

 

You have now tuned your TV to the VCR. Whenever you want to play a tape, set the TV to the video channel.

RF CHANNEL

To check to see if the TV tuning is correct

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct.

To obtain a clear picture from the VCR

If the screen does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL in step 2, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel so that a clear picture appears.

Note

• If you set the wrong TV system, you may have no sound or sound may be distorted.

18Tuning your TV to the VCR