Step 5 : Tuning your TV to the VCR

If your TV has a Scart (EURO-AV) connector, see page 22.

If your TV does not have a Scart (EURO-AV) connector

Follow the steps below so that your TV will properly receive the video signals from your VCR.

RF CHANNEL

PROGRAM +/–

1

AUTO

Press RF CHANNEL on the VCR lightly.

 

 

 

 

SET UP

The factory-preset RF channel appears in the display window.

 

 

 

 

The VCR signal is output through this channel to the TV.

Started Getting

RF CHANNEL

2

3

Turn on your TV and select a programme position for the VCR picture.

This programme position will now be referred to as the video channel.

Tune the TV to the same channel shown in the VCR display window so

that the picture on the right appears SONY VIDEO CASSETTE RECORDER clearly on the TV screen.

Refer to your TV manual for TV tuning instructions.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.

continued

Tuning your TV to the VCR 21