Specifications

System

Channel coverage PAL (I)

VHF IA to IJ, SA10 to SA13 (SLV-SE710I only)

UHF B21 to B69

CATV S01 to S05, S1 to S20 (SLV-SE710I only)

HYPER S21 to S41 (SLV-SE710I only) RF output signal

UHF channels 21 to 69 Aerial out

75-ohm asymmetrical aerial socket Tape speed

SP:PAL23.39 mm/s (recording/playback)

NTSC33.35 mm/s (playback only)

LP:PAL11.70 mm/s (recording/playback)

NTSC16.67 mm/s (playback only) EP:NTSC11.12 mm/s (playback only)

Maximum recording/playback time

10 hrs. in LP mode (with E300 tape) Fast-forward and rewind time

Approx. 1 min. (with E180 tape)

Inputs and outputs

iLINE-1 (TV)

21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3

tLINE-2 IN (SLV-SE710G, SE710I) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

tLINE-3 IN (SLV-SE810G) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

tLINE-2 IN L o R (SLV-SE810G) VIDEO IN, phono jack (1)

Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2) Input level: 327 mVrms

Input impedance: more than 47 kilohms

R/D L/G (SLV-SE710G, SE710I, SE810G)

Phono jack (2)

Rated output level: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

General

Power requirements

220 – 240 V AC, 50 Hz Power consumption

20 W

1.2W (POWER SAVE is set to ON, minimum)

Operating temperature 5° C to 40° C

Storage temperature –20°C to 60° C

Dimensions including projecting parts and controls

Approx. 430 × 98 × 283 mm (w/h/d) (SLV- SE610G, SE710G, SE710I)

Approx. 430 × 98 × 289 mm (w/h/d) (SLV-SE810G)

Mass

Approx. 4.1 kg

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2)

Aerial cable (1)

Design and specifications are subject to change without notice.

Information Additional

Specifications 87