Step 5

Tuning your TV to the VCR

If you have connected the VCR to your TV using the EURO-AV cable, skip this step.

RF CHANNEL

1

Press RF CHANNEL on the VCR lightly.

 

The factory-preset RF channel appears in the display window.

 

RF CHANNEL

The VCR signal is output through this channel to the TV.

Started Getting

2

3

Turn on your TV and select a programme position for the VCR picture.

This programme position will now be referred to as the video channel.

Tune the TV to the same channel as that

shown in the display window so that SONY VIDEO CASSETTE RECORDER the picture on the right appears clearly

on the TV screen.

Refer to your TV manual for tuning instructions.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.

continued

Getting Started 15