7Press DIAL TIMER to complete the setting.

“OK” appears in the display window for about five seconds.

Theindicator appears in the display window and the VCR stands by for recording.

To stop recording

To stop the VCR while recording, press pSTOP.

To use the VCR after setting the timer

To use the VCR before a timer recording begins, just press I/u. The indicator turns off and the VCR switches on. Remember to press I/uto reset the VCR after using the VCR.

Tips

•The programme is recorded in the current tape speed mode. To change the tape speed, press SP/LP before you complete the setting in step 7.

•To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” (page 55).

Notes

 

• The

indicator flashes in the display window when you complete the setting in

step 7 with no tape inserted.

•If eight programmes have already been set, “FULL” appears in the display window for about three seconds in step 1.

Additional Operations 53