Audio dubbing (SLV-SE840D/E only)
This feature lets you record over the normal audio track. The monaural sound previously recorded is replaced while the original
AUDIO DUB
Before you start... | t | X |
|
•Open the t
•Turn on the TV and set it to the video channel.
1Insert a source tape into your stereo system (or the playback VCR). Search for the point to start playback and set it to playback pause.
2Insert a prerecorded tape with its safety tab in place into this (recording) VCR. Search for the start of the section to be replaced and press
X (pause).
The VCR enters pause mode.
3Press AUDIO DUB.
“A_DUB” and the indicator appears in the display window.
4To start editing, press the X (pause) buttons on this VCR and the stereo system (or other VCR) at the same time.
After you use this feature, the audio in playback mode is automatically set to monaural.
To stop editing
Press x (stop) on this VCR and the stereo system (or other VCR).
76Audio dubbing