To

Press

 

 

Switch to Teletext*1

/ (Teletext)

 

 

Select the sound*2

AUDIO MONITOR

 

 

Use FASTEXT*1

FASTEXT buttons

 

 

Call up the on-screen display

DISPLAY

 

 

Change the Teletext page*1

c / C

 

 

Switch to/from wide mode of a Sony wide TV (For

(wide)

other manufactures’ wide TVs, see “Controlling

 

other TVs with the remote commander (SLV-

 

SE840G only)” below.)

 

 

 

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery together with an old one.

•Do not use different types of batteries together.

•Do not leave the remote commander in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction.

•Some buttons may not work with certain Sony TVs.

*1 SLV-SE840G only

*2 not available on SLV-SE240G/I

Controlling other TVs with the remote commander (SLV- SE840G only)

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number.

1 Set [TV] / [VIDEO] at the top of the remote commander to [TV].

2 Hold down ?/1, and enter your TV’s code number using the programme number buttons. Then release ?/1.

Now you can use the following TV control buttons to control your TV:

?/1, t TV/VIDEO, programme number buttons, - (ten’s digit), PROG +/–, 2 +/–, a (TV), / (Teletext), FASTEXT buttons,

(wide)*, MENU*, M/m/</,*, and OK*.

* These buttons may not work with all TVs.

14Setting up the remote commander