Specifications

System

Channel coverage PAL (I)

VHF IA to IJ, SA10 to SA13* UHF B21 to B69

CATV S01 to S05, S1 to S20* HYPER S21 to S41*

RF output signal

UHF channels 21 to 69 Aerial out

75-ohm asymmetrical aerial socket Tape speed

SP:PAL23.39 mm/s (recording/playback) NTSC33.35 mm/s (playback only) LP:PAL11.70 mm/s (recording/playback) NTSC16.67 mm/s (playback only) EP:NTSC11.12 mm/s (playback only)

Maximum recording/playback time

10 hrs. in LP mode (with E300 tape) Rewind time

Approx. 1 min. (with E180 tape)

*SLV-SE740I and SE240I only

Inputs and outputs

LINE-1 (EURO AV) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3 LINE-2/LINE-3

21-pin

Video input: pin 20

Audio input: pins 2 and 6

tLINE-2 L o R*1

VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2) Input level: 327 mVrms

Input impedance: more than 47 kilohms AUDIO (OUT) R, L*2

Phono jack (2)

Rated output level: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

*1 SLV-SE840G only

*2 not available on SLV-SE240G/I

General

Power requirements

220 – 240 V AC, 50 Hz Power consumption

•SLV-SE240G/I 15 W

1.2W (POWER SAVE is set to ECO2, minimum)

•SLV-SE840G and SE740G/I 17 W

1.3W (POWER SAVE is set to ECO2, minimum)

Operating temperature 5° C to 40° C

Storage temperature –20°C to 60° C

Dimensions including projecting parts and controls (w/h/d)

Approx. 360 × 95 × 255 mm (SLV-SE240G/I)

Approx. 430 × 96 × 255 mm (SLV-SE840G and SE740G/I)

Mass

Approx. 2.8 kg (SLV-SE240G/I) Approx. 3.1 kg (SLV-SE840G and SE740G/I)

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2)

Aerial cable (1)

Design and specifications are subject to change without notice.

76Specifications