Getting Started
13
Connecting the VCR

Connection to your TV and Set-Top Box (STB)

If you dont use a STB, skip to page 16.
The illustration below shows an example of connecting the STB to LINE-3 IN.
You can watch programmes from the Set-Top Box connected to this VCR on your TV
even when the VCR is turned off using the Line Throug h func tion . When you tu rn on
the STB, this VCR automatically sends the signal from the STB to the TV without
turning itself on
Note
You cannot watch programmes from your STB on the TV while recording unless you record
a programme from your STB.
1Connect the STB to the DECODER/LINE-3IN connector as shown above.
2Set DECODER/LINE-3 to LINE-3 in the OTHER OPTIONS menu.
3Set POWER SAVE to OFF in the OTHER OPTIONS menu.
4Turn off the VCR.
To watch a programme from the STB, turn on the STB and your TV.
:Signal flow
t LINE-3 IN
AERIAL
IN
i LINE-1
(TV)
Aerial cable (supplied)
AERIAL
OUT
Scart cable (supplied with Set-
Top Box )
Scart
(EURO-AV)
Set-Top
Box
Scart
(EURO-AV)
Scart cable (not supplied)
continued