Step 4 : Tuning your TV to the VCR

If your TV has a Scart (EURO-AV) connector, see page 15.

If your TV does not have a Scart (EURO-AV) connector

Follow the steps below so that your TV will properly receive the video signals from your VCR.

?/1 ON/STANDBY

RF CHANNEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM +/–

 

 

 

 

1

ON/STANDBY

Press ?/1ON/STANDBY to turn on the VCR.

 

 

 

 

 

 

 

 

 

 

 

 

 

2

AUTO

Press RF CHANNEL on the VCR lightly.

SET UP

 

The factory-preset RF channel appears in the display window.

The VCR signal is output through this channel to the TV.

RF CHANNEL

Started Getting

3

4

Turn on your TV and select a programme position for the VCR picture.

This programme position will now be referred to as the video channel.

Tune the TV to the same channel shown in the VCR display window so that the

picture on the right appears clearly on the SONY VIDEO CASSETTE RECORDER TV screen.

Refer to your TV manual for TV tuning instructions.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.

continued

Tuning your TV to the VCR 13