5

 

PROGRAM

Press PROGRAM +/– (repeatedly) to select the appropriate TV

 

 

 

 

system for your area. Select “G” for the B/G TV system, or “K” for

 

 

 

the D/K TV system.

 

 

 

 

 

 

 

 

6

 

 

Tune the TV to the same channel as that

 

 

 

 

 

 

 

shown in the display window so that

SONY VIDEO CASSETTE RECORDER

 

 

 

 

the picture on the right appears clearly

 

 

 

 

 

on the TV screen.

 

 

 

 

 

Refer to your TV manual for tuning

 

 

 

 

 

instructions.

 

 

 

 

 

If you select the wrong TV system in

 

 

 

 

 

 

 

 

 

 

step 5, the picture on the right may not

 

 

 

 

 

appear. Select the appropriate TV

 

 

 

 

 

system and tune the TV again.

 

 

 

 

 

If the picture does not appear clearly,

 

 

 

 

 

see “To obtain a clear picture from the

 

 

 

 

 

VCR” below.

 

 

 

 

 

 

 

 

7

 

 

Press RF CHANNEL.

 

 

 

RF CHANNEL

You have now tuned your TV to the VCR. Whenever you want to

 

 

 

 

play a tape, set the TV to the video channel.

Started Getting

To check to see if the TV tuning is correct

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct.

To obtain a clear picture from the VCR

If the screen does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears.

Note

• If you set the wrong TV system, you may have no sound or sound may be distorted.

Getting Started 15