Step 2 : Setting up the remote commander (continued)

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

To make wide mode settings, see the footnotes below this table for the applicable code numbers.

Manufacturer

Code number

 

 

Sony

01*1, 02

Akai

68

Ferguson

52

Grundig

10*1, 11*1

Hitachi

24

JVC

33

Loewe

45

Mivar

09, 70

NEC

66

Nokia

15, 16, 69*3

Manufacturer

Code number

 

 

Panasonic

17*1, 49

Philips

06*1, 07*1, 08*1

Saba

12, 13

Samsung

22, 23

Sanyo

25

Sharp

29

Telefunken

36

Thomson

43*2

Toshiba

38

*1 Press WIDE to switch the wide picture mode on or off.

*2 Press WIDE, then press ç+/– to select the wide picture mode you want.

*3 Press WIDE. The menu appears on the TV screen. Then, press >/./?//to select the wide picture you want and press OK.

Notes

•If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander.

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries.

8Getting Started