Sony SLV-X717ME, SLV-X717PS, SLV-X717SG, SLV-X817ME, SLV-X817PS, SLV-X817SG 1 2 3, 4, 5 6, 1, 2 3 4

Getting Started 17

SLV-X817/717ME/PS/SG 3-858-651-11 (1)

Getting Started

Disabling unwanted programme positions

After tuning the TV channels, you can disable unused programme positions.

The disabled positions will be skipped later when you press the PROG +/–

buttons.

1Press MENU, then select TUNER PRESET and press EXECUTE.

2Select CHANNEL SET.

3Press PROG +/– until the programme position you want to disable

appears beside “PROG” on the TV screen.

4Press programme number button “0” twice to display the number “0”

beside CHANNEL SET.

5Repeat steps 3 and 4 for other positions you want to disable.

6Press EXECUTE.

If the picture is not clear

Normally, the Auto Fine Tuning (AFT) function automatically tunes in

channels clearly. If, however, the picture is not clear, you may also use the

manual tuning function.

1Press PROG +/– to select the programme position for which you cannot

obtain a clear picture.

2Press MENU, then select TUNER PRESET and press EXECUTE.

3Select FINE TUNING. The fine tuning meter appears.

4Press CURSOR ?// to get a clearer picture, then press EXECUTE.

Note that the AFT (Auto Fine Tuning) setting switches to OFF.

Note

• The menu disappears automatically if you don’t proceed for more than a few

minutes.

TUNER PRESET PROG14

NORMAL / CATV

AUTO PRESET

CHANNEL SET

AFT

FINE TUNING

NORM

ON

•

•

CATV

OFF

35

SET :[ ]

Selected programme

position

Contents

Main Introduction WARNING Precautions Safety Installing Caution Table of contents Basic Operations Additional Operations Getting Started Additional Information Unpacking Checking your model name Step 2 Setting up the remote commander Inserting the batteries Using the remote commander Step 3 Connecting the VCR 1 2 3 Additional connections Step 4 Tuning your TV to the VCR 1 2 3 4 5 6 2 3 Selecting a language Step 5 4 Step 6 Setting the clock 5 6 Step 6 : Setting the clock (continued) Step 7 Tuning the VCR Presetting all receivable channels automatically 3 4 Step 7 : Tuning the VCR (continued) Getting Started Getting Started 15 3 cursor (z) to NORMAL/CATV, then select NORM. To preset CATV channels, select CATV. MENU CURSOR EXECUTE CURSOR 4 5 8 6 7 1 2 3 4 5 6 If the picture is not clear 1 1 2 The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 3 Playing a tape (continued) Turning on the VCR and TV, and starting playback automatically (Trinitron TV Synchro Play) 1 2 3 4 5 1 2 Recording TV programmes (continued) 1 using the timer Recording TV programmes using the timer (continued) 2 3 4 5 Page To resume normal playback Press PLAY. Playing/searching at various speeds Using the CLICK SHUTTLE ring (SLV-X717 only) using the quick timer 1 2 Checking/ changing/ cancelling timer settings 1 2 3 4 Recording stereo programmes (SLV-X817 only) Selecting the sound during playback Press AUDIO MONITOR to select the sound you want. How sound is recorded on a video tape Adjusting the picture Adjusting the tracking About Adaptive Picture Control (APC) Changing menu options 1 2 3 Editing with another VCR How to connect to record on this VCR Editing with another VCR (continued) 1 2 3 4 Operation (when recording on this VCR) Audio dubbing 1 2 3 4 Troubleshooting Symptoms caused by contaminated video heads Page Additional Information Specifications Supplied accessories System Inputs and outputs General Index to parts and controls Front panel (SLV-X717) Front panel (SLV-X817) Index to parts and controls (continued) Display window Rear panel Index to parts and controls (continued) Remote commander Page Index A, B C D E, F, G