Speaker Connections and Placement
Placement
The speaker can be placed vertically or horizontally.
Connections
Be sure to set the POWER switch on the back panel to OFF before making any connections.
TW LEVEL | MASTER VOL. | BASS |
| TREBLE |
|
NORMAL |
|
| |||
– + | 0 10 | – | + | – + |
|
|
| CH 1 IN |
|
| |
| VOL |
|
|
|
|
SEND |
|
|
|
|
|
|
|
|
| 3HOT 2HOT |
|
0 | 10 |
|
|
|
|
|
| CH 2 IN |
| Connect only one. | |
OUT | VOL | CH IN | DIRECT | 3HOT 2HOT | |
CASCADE RETURN |
|
|
|
|
|
0 | 10 |
|
|
| Balanced(XLR)cord |
|
|
|
|
| |
|
|
|
|
| phone plug cord |
|
|
|
| ON | Audio phono cord |
|
|
|
| POWER |
|
BREAKER 
OFF
To the output terminals of an electronic instrument, mixing console, computer, or audio device (etc.).
|
|
|
|
|
|
|
|
|
|
|
|
| To a wall |
|
|
|
|
|
|
|
|
|
|
|
|
| outlet |
Balanced terminal polarity |
| ||||||||||||
When the balanced | When the balanced | ||||||||||||
input terminal | input terminal | ||||||||||||
polarity switch is set | polarity switch is set | ||||||||||||
to 2HOT. |
| to 3HOT. |
| ||||||||||
|
|
|
|
| 1 | : GND |
|
|
|
|
| 1 | : GND |
|
|
|
|
| 2 | : HOT |
|
|
|
|
| 2 | : COLD |
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
| 3 | : COLD |
|
|
|
|
| 3 | : HOT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 | 3 | 1 |
| 2 | 3 | 1 |
| ||||||
Notes
•We reccomend not connecting more than one sound source to each channel.
•The RETURN terminal should only be used to input the sound output from the SEND terminal (after looping it through an effector, etc.) or when connecting several speakers. Connections made to the RETURN terminal for other purposes will not allow the sound input to the CH1 and CH2 terminals to be output.
•Pass high impedance sources (like electric guitars) and low level sources (like microphones) through a mixer before connecting to the speaker.
To connect several speakers
Be sure to set the POWER switch on the back panel to OFF before making any connections.
Connect the CASCADE OUT terminal on the first speaker to the RETURN terminal on the second speaker, etc. (You can connect up to 20 speakers.)
To the RETURN terminal on the next speaker.
FirstSecond
Speaker Speaker
How to use the slip stoppers
This unit comes supplied with 4 round (15
Balanced (XLR) cord
mmdiameter) slip stoppers. Attach one under each of the speaker's four corners to prevent the speaker from moving when subject to slight vibrations (etc.).
5