Names and Functions of Parts
Rear
|
|
|
|
| 1 |
|
|
|
|
| 2 |
|
|
|
|
| 3 |
|
|
|
|
| 4 |
TW LEVEL | MASTER VOL. | BASS | TREBLE |
| 5 |
NORMAL |
| ||||
– + | 0 10 | – + | – + |
| |
|
| CH 1 IN |
|
|
|
| VOL |
|
|
| 6 |
SEND |
|
|
|
| |
|
|
| 3HOT | 2HOT | |
0 | 10 |
|
|
| |
|
| CH 2 IN |
|
| 7 |
| VOL |
|
|
| |
CASCADE RETURN |
|
|
|
| |
OUT |
| CH IN DIRECT | 3HOT | 2HOT | |
0 | 10 |
|
|
| |
|
|
|
|
| 8 |
|
|
| POWER | 9 | |
|
|
|
| ON | |
|
| BREAKER |
|
|
|
|
|
|
| OFF |
|
|
|
| AC IN |
| 10 |
|
|
|
|
| 11 |
|
|
|
|
| 12 |
|
|
|
|
| 13 |
1 SEND terminal
Outputs a mix of the sounds input to channel 1 and channel 2. Connect to an effector or recording device (etc.). The sound is output as adjusted by the BASS and TREBLE.
2 TW LEVEL control
Adjusts the output level of the tweeter. Turn toward the right to increase. Turn toward the left to decrease.
3 MASTER VOL. (volume) control
Turning to the right increases the level of the sound output from the speaker.
4 Bass control
Turn to the right to increase the level of the bass. Turn to the left to decrease the level of the bass. (Increasing the level of the bass when listening at high volumes may cause the sound to distort.)
6
5 TREBLE control
Turn to the right to increase the level of the treble. Turn to the left to decrease the level of the treble.
6 CH 1 IN (channel 1 input)
See next page for details.
7 CH 2 IN (channel 2 input)
See next page for details.
8 Rear panel guards
Protect the controls on the rear of the speaker. Located on the left and right.
9 POWER switch
Turns the power to the speaker ON/OFF. (Before turning the power ON, be sure the MASTER VOL. control is set to the “0” position.)
10 AC socket
Connect to a wall outlet (120 V in U.S.A. or Canada,
11BREAKER
Press if the pilot lamp on the front panel does not light when the power is turned on. This resets the power supply so you can use the speaker.
12 RETURN terminal
Use to input an external sound source directly to the speaker’s power amp.
Use this terminal to input sound output to an effector, or when connecting several speakers.
13 CASCADE OUT terminal
Allows you to output a mix of the sounds input to channel 1 and channel 2. Use to output sound when connecting several speakers.