![](/images/new-backgrounds/1232489/23248945x1.webp)
Primary DNS
Type the IP address of the primary DNS server.
Secondary DNS
Type the IP address of the secondary DNS server, if necessary.
Bandwidth control
Limits the data communication bandwidth of the camera.
You can select from among the following:
Unlimited, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0 (Mbps)
Select Unlimited when you do not want to limit the bandwidth.
Notes
•If you limit the bandwidth, the camera performance may be affected, for example, the frame rate of image display may be reduced.
•The actual bandwidth may differ from the selected option depending on the network environments.
OK/Cancel
See “Buttons common to every setting page” on page 17.
HTTP port setting Section
You can set the port number for the HTTP server on the camera.
HTTP port No.
Normally select 80. If you want to use a port number other than 80, select the text box and type a port number between 1024 and 65535.
Note
When you have set the HTTP port No. to a number other than 80 on the Network setting page or in the Setup Program, access the camera by typing the IP address of the camera on the web browser, as follows:
Example: when HTTP port No. is set to 8000
Notifying the IP Address
—Dynamic IP address notification Section
When the DHCP menu is set to On, you can send the notification of the completion of the network settings (Wired LAN settings) using the SMTP or HTTP protocol.
SMTP
Select On to send an
SMTP server name
Type the name or IP address of the SMTP server you want to use for sending an
Recipient e-mail address
Type the recipient
From e-mail address
Type the
Subject
Type the subject/title of the
Message
Type the text of the
Administrating the Camera
Configuring the Network — Network setting Page
23