Accessing the Camera Using the Web Browser

When the IP address has been assigned to the camera, check that you can actually access the camera using the Web browser installed in your computer.

Use Internet Explorer as the Web browser.

1 Start the Web browser on the computer and type the IP address of the camera in the URL box.

The welcome page of “Network Camera SNC- RZ25N” or “Network Camera SNC-RZ25P” is displayed.

When the main viewer of the camera is displayed for the first time

When you click Enter, “Security warning” is displayed. When you click OK, the ActiveX control is installed and the main viewer is displayed.

Preparation

2 Click Enter.

The main viewer is displayed.

When the main viewer is correctly displayed, the IP address assignment is completed.

Notes

If Automatic configuration is enabled in the Local Area Network (LAN) Settings on Internet Explorer, the image may not be displayed. In this case, disable Automatic configuration and set the Proxy server manually. For setting the Proxy server, consult your network administrator.

When you install ActiveX viewer on Windows 2000 or Windows XP, you should have logged in the computer as the Administrator.

Tip

Every page of this software is optimized as display character size Medium for Internet Explorer.

To display the Welcome page correctly

To operate the welcome page correctly, set the security level of the Internet Explorer to Medium or lower, as follows:

1 Select Tool from the menu bar for Internet Explorer, then select Internet Options and Security tab in sequence.

2 Click the Internet icon (when using the camera via the Internet) or Local intranet icon (when using the camera via a local network).

3 Set the slider to Medium or lower. (If the slider is not displayed, click Default Level.)

Accessing the Camera Using the Web Browser 11