Subject the camcorder to mechanical shock or vibration

Eject the “Memory Stick PRO Duo” media from the camcorder

You cannot add movies to a created disc.

Play the created disc to make sure dubbing was performed correctly before deleting the movies on your camcorder.

If [Failed.] or [DISC BURN failed.] appears on the screen, insert another disc into the DVD writer and touch (DISC BURN) again.

Tips

If the total memory size of movies to be burnt by the DISC BURN operation exceeds that of the disc, disc creation stops when the limit is reached. The last movie on the disc may be cut off.

Disc creation time to dub movies to the limit of the disc is about 20 to 60 minutes. It may take more time depending on the recording mode or the number of scenes.

You can play back created discs on a general DVD player. If playback is not possible for any reason, connect the camcorder to the DVD writer, and then play back.

The disc mark appears on the camcorder screen.

Creating a disc with a DVD writer, etc., other than DVDirect Express

You can save movies on a disc by connecting your camcorder to disc creation devices, such as a Sony DVD writer other than DVDirect Express, with the USB cable. Refer also to the instruction manuals supplied with the devices to be connected. The method used to create a disc by connecting your camcorder to a Sony DVD writer with the USB cable is described here.

Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 17).

Sony DVD writer may not be available in some countries/regions.

Turn on your camcorder, and connect a DVD writer, etc., to the (USB) jack of your camcorder with the USB cable (supplied).

The [USB SELECT] screen appears on the camcorder screen.

If the [USB SELECT] screen does not appear, touch (HOME) (OTHERS) [USB CONNECT].

Touch [USB CONNECT] when movies are recorded on the

internal hard disk, or [USB CONNECT] when movies are recorded on “Memory Stick PRO Duo” media on the camcorder screen.

Record movies on the connected device.

For details, refer to the instruction manuals supplied with the device to be connected.

After the operation is completed, touch [END] [YES] on the camcorder screen.

Disconnect the USB cable.

Contents of Table

Techniques Recording Useful

Index

55