Listening to the sound

VOLUME

1 button

VOLUME +/– buttons

Check the following before operating the unit.

–If you have been listening to the sound from the BLUETOOTH stereo audio source device, stop playing on the device or terminate the BLUETOOTH connection.

1Press the 1 button to turn on this unit.

The 1 indicator lights up.

2Start playing on the source device.

3Adjust the volume.

Set the volume of the source device to moderate level, and press the VOLUME +/– buttons on this unit.

Note

A beep sounds when the volume is set to minimum or maximum.

4Press and hold the 1 button to turn off this unit after using.

The 1 indicator goes off.

Notes

•If connecting the speaker to a device with a built-in radio or tuner, radio broadcasting cannot be received or sensitivity may be reduced significantly.

•If the source device has a bass boost function or equalizer function, set them to off. If these functions are on, sound may be distorted.

•If the source device’s headphone output has a line switch, better sound will be heard if it is set to on. See the operating instructions of the source device.

•If both the BLUETOOTH connected device and the one connected to the INPUT jack are played at the same time, both sounds can be heard.

15

US