Sony SRX-R110 Specifications, Preset Data of Input Signals

Specifications

SXRD Device Main Specifications

Display device		SXRD (Silicon X-tal Reflective Display)
Size		1.55" across Diagonal
Resolution		4096(H) X 2160(V) Pixels
Reflectivity		72%
Contrast (as device)		More than 4000 : 1
Pixel pitch		8.5µm
Width (between pixels)		0.35µm
Response speed		5msec (tr + tf)
Liquid crystal mode		Vertical Aligned Mode
Alignment layer		Inorganic Thin Film
Backplane process		0.35µm MOS Process
Liquid crystal cell gap		Less than 2µm

Optical
Projection system	3-SXRD panel, prism color integrated system
Imaging device	SXRD, 1.55-inch (diagonal), 4096(H) x 2160(V) pixels
	on each chip
Lamp	2kW Xenon lamp x 2 (SRX-R110)
	1kW Xenon lamp x 2 (SRX-R105)
Screen coverage	14 feet to 51 feet (Approx. 4.5 m to 15.5 m)
	(viewable area, measured horizontally)
Light output	10,000 ANSI lumens ±10% (SRX-R110)*
	5,000 ANSI lumens ±10% (SRX-R105)
General
White reference	Xenon white reference
			X	Y
		White reference	0.3140	0.3510
Contrast	more than 1800:1
Resolution	600 TV lines (SDI input/SMPTE-259M)
	1920 x 1080 pixels (HD-SDI input, SMPTE-292M)
	4096 x 2160 pixels (RGB)
Signal specifications	Video: Component (Y • Cb • Cr), HD (G • B • R/Y • Pb • Pr)
	Computer: XGA, SXGA, UXGA
Power requirements	AC 200 to 240 V, 50/60 Hz (SRX-R110)
	AC 100 to 240 V, 50/60 Hz (SRX-R105)
Operating temperature	+5ºC to +35ºC (+41ºF to +90ºF)
Storage temperature	-20ºC to +60ºC (12ºF to +140ºF)
Operating humidity	35% to 85% (without condensation)
Storage humidity	10% to 90%
Dimensions	Approx. 740 x 500 x 1330mm
(W x H x D)	(29 4/5 x 19 4/5 x 52 3/5 inchs)
Mass	Approx. 110 kg (242 lb 8oz)
Input/Output
Input A	Open for optional signal interface board
Input B	Open for optional signal interface board
Input C	Open for optional signal interface board
Input D	Open for optional signal interface board
Remote interface	D-sub 9-pin, RS-232C (female) x 1
	Ethernet terminal, 10Base-T/100Base-TX x 1

*ANSI lumens is a measuring method of the American National Standards Institute.

Preset Data of Input Signals

No	Signal Number	fH	fV	Aspect	Horizontal	Vertical
					Sampling	Sampling
0	NO INPUT	0	0
3	VIDEO60(480_60I)	15.73 kHz	59.94 kHz	4:3	1280	480
4	VIDEO50(575_50I)	15.63 kHz	50.00 kHz	4:3	1280	570
5	HDTV(1080_60I)	33.75 kHz	60.00 kHz	16:9	1920	1080
23	1024 x 768_VESA60	48.36 kHz	60.00 kHz	4:3	1024	768
24	1024 x 768_VESA70	56.48 kHz	70.07 kHz	4:3	1024	768
25	1024 x 768_VESA75	60.02 kHz	75.03 kHz	4:3	1024	768
26	1024 x 768_VESA85	68.68 kHz	85.00 kHz	4:3	1024	768
32	1280 x 960_VESA60	60.00 kHz	60.00 kHz	4:3	1280	960
33	1280 x 960_VESA75	75.00 kHz	75.00 kHz	4:3	1280	960
36	1280 x 1024_VESA60	63.97 kHz	60.01 kHz	5:4	1280	1024
37	11280 x 1024_VESA75	79.98 kHz	75.03 kHz	5:4	1280	1024

Input Boards

LKRI-001	BNC x 5, HD/SD analog video input,
Analog input board	RGB/Y • Cb • Cr selectable
	Computer signals
		R	0.7 Vp-p ±2dB positive, 75 Ω
		G	0.7 Vp-p ±2dB positive, 75 Ω
		B	0.7 Vp-p ±2dB positive, 75 Ω
	Standard definition video [Y • Cb • Cr]
		Y	1.0 Vp-p ±2dB sync negative, 75 Ω
		Cb	0.7 Vp-p ±2dB positive, 75 Ω
		Cr	0.7 Vp-p ±2dB positive, 75 Ω
	High definition video [RGB]
		R	0.7 Vp-p ±2dB positive, 75 Ω
		G with sync	1.0 Vp-p ±2dB, 75 Ω, Tri-level sync:
			±0.3 Vp-p / Bi-level sync: 0.3 Vp-p
		B	0.7 Vp-p ±2dB positive, 75 Ω
	High definition video [Y • Pb • Pr]
		Y	1.0 Vp-p ±2dB, 75 Ω,Tri-level sync:
			±0.3 Vp-p / Bi-level sync: 0.3 Vp-p
		Pb	±0.35 Vp-p ±2dB, positive 75 Ω
		Pr	±0.35 Vp-p ±2dB, positive 75 Ω
	Sync
		HD Horizontal	TTL level, high impedance, sync
			positive/negative
		HD Vertical	TTL level, high impedance, sync
			positive/negative
LKRI-002	BNC x 2(Input x 1,Loop-through out x 1)
HD-SDI (4:2:2)	HD-SDI (SMPTE-292M / ITU-R.BT709 / BTA-S004)
input board	SDI (SMPTE-259M / ITU-R.BT601)
LKRI-003	BNC x 4(Input x 2,Loop-through out x 2)
Dual-link HD-SDI	HD-SDI (Single-link, HD-SDI/4:2:2,SMPTE-292M):Y • Pb • Pr,
input board	DC-SDI (Single-link, DC-SDI/4:2:2):Y • Pb • Pr,
	Dual-link HD-SDI (Dual-link HD-SDI/4:4:4,SMPTE-372M):RGB,
	Dual-link DC-SDI (Dual-link DC-SDI/4:4:4):RGB
Others
Safety regulations	[UL60950 listed], [cUL60950], [FCC Class A], [IC Class A], [VCCI
	Class A], [EN60950],[CE Class A], [C-tick], [GB4943], [GB9254],
	[K60950], [CISPR22], [CISPR24]
Supplied	Remote controller x 1/ CD-ROM x 1 (Remote control application
accessories	for Windows® XP Professional Edition) / Dry cell (AA size) x 2 /
	Ethernet Cross Cable (3 m) x 1
	Operation instructions x 1 / Installation manual x 1
Optional	LKRL-Z115: 1.5 to 1.9x zoom lens
accessories	LKRL-Z120: 1.9 to 2.3x zoom lens
	LKRL-Z125: 2.3 to 4.0x zoom lens
	LKRL-Z140: 4.0 to 7.0x zoom lens
	LKRI-001: Analog input board
	LKRI-002: HD-SDI (4:2:2) input board
	LKRI-003: Dual-link HD-SDI input board
	LKRX-105: 1kW Xenon lamp bulb for replacement (for SRX-R105)
	LKRX-B105: 1kW Xenon lamp house unit for replacement (for SRX-R105)

LKRX-110: 2kW Xenon lamp bulb for replacement (for SRX-R110)

LKRX-B110: 2kW Xenon lamp house unit for replacement (for SRX-R110)

LKRA-001: 8-inch Exhaust Duct adaptor

No	Signal Name	fH	fV	Aspect	Horizontal	Vertical
					Sampling	Sampling
38	1280 x 1024_VESA85	91.15 kHz	85.02 kHz	5:4	1280	1024
39	1600 x 1200_VESA60	75.00 kHz	60.00 kHz	4:3	1600	1200
45	1080_50I	31.25 kHz	50.00 kHz	16:9	1920	1080
47	720_60P	45.00 kHz	60.00 kHz	16:9	1280	720
48	720_50P	37.50 kHz	50.00 kHz	16:9	1280	720
49	1080_48I (24PsF)	27.00 kHz	48.00 kHz	16:9	1920	1080
(75)	1080_60i	33.75 kHz	60.00 kHz	16:9	1920	1080
(76)	1080_25PsF	31.25 kHz	50.00 kHz	16:9	1920	1080
(77)	1080_30PsF	33.75 kHz	60.00 kHz	16:9	1920	1080

Note:*When a signal other than the preset signals shown above is fed into this projector, the images may not be projected properly.

*SXGA+(1400 x 1050) computer signal is not supported by this projector. If this signal is fed into the projector, one of the four directions of an image are irregularly missing.