Easy setup on a PC using supplied software

The SRX-R110 and SRX-R105 come equipped with setup software that allows easy setup and adjustments via its intuitive GUIs on a PC*. These projectors can be controlled through Ethernet or RS-232C interface, and multiple numbers of projectors can be controlled from a single PC**.

A comprehensive range of setup parameters including input configurations, colorimetry controls, installation adjustments and maintenance settings can be controlled via this software.

*System requirements for the setup software

OS: Microsoft® Windows® XP Professional.

**When using an Ethernet connection.

Ethernet

SRX-R110/R105 SRX-R110/R105 SRX-R110/R105 Note PC

RS-232C

Note PC

SRX-R110/R105

Installation setting

Colorimetry setting

Easy maintenance

Special consideration for maintenance issue is taken into the development of these projectors to effectively perform periodic maintenance.

Lamp bulbs and lamp house units used in the projectors can be easily replaced on site without any special tools, thus shortening the downtime required for the replacement. What’s more, a cumbersome adjustment after the replacement is not required.

The supplied setup software is another convenient tool for maintenance. This allows operators to easily verify lamp’s operating time. Automatic email alerts from the projector provides operators with maintenance reminders as well as error occurrences.

9