Highly pure, superb colour tonal reproduction
Wide Colour Range
Xenon lamp provides highly bright and pure light
The SRX-S110 and SRX-R110CE models provide high brightness of 10,000 ANSI lumens* from two 2kW Xenon lamps, while the SRX-S105 and SRX-R105CE models offer brightness of 5,000 ANSI lumens from two 1 kW Xenon lamps.
The Xenon lamps in SRX-Series projectors achieve a wide colour range by dispersing a very flat and wide light spectrum.
*Measured under conditions with the lamp power at 100% in dual-lamp mode.
0.9
0.8
Film
Colour Space Conversion (CSC) function
The SRX-Series projectors feature a CSC function to help users easily adjust the projector’s colour space to that defined by either the ITU*-R BT.709-3 standards for digital HDTV studio colour space, or the new DCDM colour space.
The latter is significantly wider than ITU 709 and takes advantage of the spectrum emitted by the Xenon lamp. The target colour gamut parameters satisfying the ITU-R BT. 709-3 standard or DCDM specification are automatically calculated from settings on the supplied SRX Controller software, and then applied to the projector. The internal test generator simplifies adjustment and lets the operator align the projector in minutes. White point and colour primary points can be aligned to either of these standards or to the customer’s application needs.
*International Telecommunication Union
12-bit LCD driver
The SRX-Series projectors use a 12-bit imager driver to reproduce extremely natural-looking images. This eliminates quantising and edge errors that take away from the real resolution that these projectors can achieve.
Gamma curve selection
0.0 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 |
CIE chart
The SRX-Series projectors provide three preset gamma curve values. Users can select an optimum value from 1.8, 2.2, and 2.6 according to the desired grey scale.
Highly pure, superb colour tonal reproduction
