Option slots

LKRI-001

LKRI-002

Analogue Input Board (Supplied

HD-SDI (4:2:2) Input Board

with SRX-R105CE/R110CE)

 

LKRI-003

LKRI-004

Dual-link HD-SDI Input Board

DVI Interface Board

Input signal flexibility

To increase the configuration flexibility of the SRX-Series projectors, slots are available to accommodate different optional boards that connect to various types of signal format.

The SRX-S110 and SRX-S105 models are equipped with a DVI signal input as standard, which provides the 1080/60P input capability available only with these units.

In addition to the standard DVI input, three slots are available for the installation of other optional input modules. Meanwhile, the SRX-R110CE and SRX-R105CE models have four available slots for even more flexible input configurations.

The SRX-R105CE and SRX-R110CE are supplied with one removable LKRI-001 input board and the four option board slots can accomodate any combination of input boards. Users can select the screen mode from single, dual, and quad mode, and assign the appropriate signal board to each quadrant.

•The LKRI-001Analogue input board has 5 BNC connectors that accept 0.7 volt analogue signal levels as RGBS, RGB sync on G, RGBHV or YUV formats.

•The LKRI-004DVI interface board accepts DVI-D signals up to 2048 x 1080 and the following table illustrates the range of input signals handled by each projector.

 

Resolution

SRX-S110/S105

SRX-R110CE/R105CE

Remarks

 

 

 

 

 

1

1024 x 768 at 60 Hz (XGA)

YES

YES

VESA

 

 

 

 

 

2

1280 x 960 at 60 Hz (SXGA)

YES

YES

VESA

 

 

 

 

 

3

1280 x 1024 at 60 Hz (SXGA)

YES

YES

VESA

 

 

 

 

 

4

1400 x 1050 at 60 Hz (SXGA+)

YES

YES

VESA

 

 

 

 

 

5

1600 x 1200 at 60 Hz (UXGA)

YES

YES

VESA

 

 

 

 

 

6

2048 x 1080 at 60 Hz

YES

NO

—

 

 

 

 

 

7

1920 x 1080 at 24 Hz

YES

YES

—

 

 

 

 

 

8

2048 x 1080 at 24 Hz

YES

YES

—

 

 

 

 

 

9

1920 x 1200 at 59.95 Hz Reduced Blanking (WUXGA)

YES

NO

VESA

 

 

 

 

 

10

1920 x 1080 at 60 Hz

YES

NO

EIA/CEA-861B

 

 

 

 

 

11

2048 x 1080 at 48 Hz

YES

YES

—

 

 

 

 

 

•The LKRI-002HD-SDI (4:2:2) input board accepts both SMPTE 259M SD digital 525/625 line video and SMPTE 292M 1080 4:2:2 Y-Pb-Pr serial picture data. Switching is automatic by detection of the input signal frequency.

•The LKRI-003Dual-link HD-SDI input board accepts any of the following signals: SMPTE 372M dual-link HD-SDI (4:4:4), SMPTE 292M HD-SDI (4:2:2), dual-link DC-SDI (RGB 4:4:4), DC-SDI (YPbPr 4:2:2), or 12-bit (X’Y’Z’ 4:4:4) signals. With four LKRI-003 boards, the SRX-R110CE or SRX-R105CE can project 4096 x 2160 4K images.

Simple Installation

SRX-Series projectors can be installed easily into almost any envi- ronment. Compared with conventional projectors in the ultra-high resolution class, they are highly compact and lightweight. Plus, their power requirements are also reasonable – due to the use of single- phase power, which allows for remarkably low power consumption and simpler installation.

To aid effective cooling, an optional exhaust duct adaptor is available, which allows the projectors to be easily connected to a common 8-inch type duct system.

Operational versatility

8