FM aerial hookups

With an FM outdoor aerial, you can obtain a higher FM broadcast sound quality. We recommend that you use the supplied FM wire aerial only temporarily until you install an FM outdoor aerial. For the specific location of the FM ANTENNA terminals, see the illustration below.

FM ANTENNA

What will I need?

FM wire aerial (supplied) (1)

FM outdoor aerial (not supplied) (1) and 75-ohm coaxial cable (not supplied) (1)

Connect the supplied FM wire aerial or an FM outdoor aerial (not supplied) to the FM terminals on the back of this unit.

FM wire aerial

ANTENNA

FM

75Ω

y

FM outdoor aerial

ANTENNA

FM

75Ω

y

Connecting a ground wire

If you connect an outdoor aerial, be sure to connect a ground wire (not supplied) to the AM ANTENNA y terminal (in addition to the AM loop aerial) for lightning protection.

Getting Started

Amplifier hookups

Connect the tuner to an amplifier. Be sure to turn off the power to both components before connection. For the specific location of the terminals, see the illustration below.

LINE OUT

What cables will I need?

• Audio cord (supplied) (1)

White (L)

White (L)

Red (R)

Red (R)

Connect the white plugs to the white (L) jacks and the red plugs to the red (R) jacks. Insert the plugs completely into the jacks; incomplete connections may cause noise.

Tuner

LINE OUT

Amplifier

TUNER

R

L

R

L

Setting the voltage selector

Check that the voltage selector on the rear panel of the tuner is set to the local power line voltage. If not, set the selector to the correct position using a screwdriver before connecting the mains lead.

 

 

 

 

 

110-120 V

 

 

220-240 V

 

 

 

 

 

 

 

 

 

 

 

Mains lead hookups

ST-JX661:

Connect the mains lead to an AC OUTLET on the rear panel of TA-AV561 or TA-AV661 after completing all of the previous connections.

ST-SE200:

Connect the mains lead to a wall outlet after completing all of the previous connections.

/

to an AC OUTLET on TA-AV561 or TA-AV661 (ST-JX661)

to a wall outlet (ST-SE200)

5EN