Listening to the sound in another room (continued)

(For STR-DA3ES)

The same source is output to the 2nd and the 3rd room.

1 Set the SPEAKER switch to “MAIN + 2ND ROOM”.

The indicator lights up.

2 Press 2ND ROOM, then turn the jog dial to select the analog audio signals.

The audio source changes cyclically as follows:

SOURCE* t VIDEO 1 t VIDEO 2 t VIDEO 3 t DVD/LD t TV/SAT t TAPE t MD/DAT t CD/SACD t

TUNER

*The audio signals of the current function is output.

3 Adjust the volume using the remote.

Set the remote to the 3rd room mode. For details, refer to the instruction manual supplied with the remote.

Tips

•To cancel the output of the sound from SPEAKERS 3RD ROOM terminals (SPEAKERS 2ND ROOM terminals for STR-DA3ES), set “3RD ROOM SP” (“2ND ROOM SP” for STR-DA3ES) to “OFF” in the SET UP menu (page 48). The indicator turns off.

•When “SOURCE” is selected, the signals input to the MULTI CH IN jacks are not output from the SPEAKERS 3RD ROOM jacks (For STR-DA3ES, the SPEAKERS 2ND ROOM jacks) even when MULTI/2CH ANALOG DIRECT is set to MULTI CH 1 or 2 DIRECT. The analog audio signals of the current function are output.

Note

If you turn off the receiver when the SPEAKER switch is set to “MAIN + 3RD ROOM” (or “MAIN + 2ND ROOM”), then turn on again, “3RD ROOM SP” (or “2ND ROOM SP”) in the SET UP menu automatically set to “OFF” and the sound is not output from the speakers. (The indicator also turns off.) The sound will be output when you press ?/1 on the remote whose command mode is set to “3RD ROOM”, or set “3RD ROOM SP” (or “2ND ROOM SP”) to “ON”.

Changing the display

DISPLAY

Press repeatedly to change the information on the display window.

DIMMER

Press DIMMER repeatedly to adjust the brightness of the display (5 steps). DIMMER indicator lights when the dimmer function is activated.

30