Adjustments using the
SET UP button
The SET UP button allows you to make the following adjustments.
1
2 Press the cursor buttons ( or ) to select the parameter you want to adjust.
3 Turn the jog dial to select the setting you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set all of the parameters that follow.
Initial settings
Parameter | Initial setting |
6.1CH DECODING | AUTO |
|
|
MULTI CH (1 or 2) | NONE |
|
|
S.FIELD LINK | ON |
|
|
A1 AUTO POWER | ON |
|
|
AUTO FUNCTION | ON |
|
|
2ND ROOM SP1) | OFF |
COMMAND MODE | AV1 |
|
|
OSD | COLOR |
|
|
OSD H.POSITION | 4 |
|
|
OSD V.POSITION | 4 |
1)Only when the center or surround back speaker is set to “2ND ROOM”.
x6.1ch Matrix (6.1CH DECODING)
According to the setting, the receiver decodes and downmixes the surround back signals to the surround speakers for 6.1 channel encoded sources. This parameter lets you enjoy the appropriate surround sound from the surround channels.
•You can set this parameter using 6.1CH DECODING on the front panel.
•When set to “AUTO”, the receiver performs
6.1channel matrix decoding only if 6.1 channel signals decode flag is ON.
•When set to “ON”, the receiver performs
6.1channel matrix decoding only if the surround signals are 2 channel, regardless of the
6.1channel decode flag.
•When set to “OFF”, the receiver does not perform 6.1 channel matrix decoding.
•During “A.F.D.”, this parameter is always set to “AUTO”, and you cannot change the setting.
•When the 6.1 channel matrix decoding is performed and the surround back speaker is set to “NO”, you can enjoy the surround back signals with virtual 3D technology, even without an actual surround back speaker (the box around SB does not light up). If the surround back speaker is set to “YES”, the surround back signals are output through the actual speaker (SB and the box lights up).
xMulti channel assignment (MULTI CH 1 or 2)
Lets you assign a function to MULTI CH 1 or 2. You cannot assign TUNER or PHONO.
You cannot assign the same function to both MULTI CH 1 and 2.
xSound field link (S.FIELD LINK)
Lets you apply the last selected sound field to a program source whenever it is selected. For example, if you listen to CD with STADIUM as the sound field, change to a different program source, then return to CD, STADIUM will be applied again.
40