Naming preset stations
You can store names (index names), up to 8 characters long, for your preset stations. Once you name a preset station, the name appears in the display instead of the frequency when you tune to that preset station. The characters you can use include letters, numbers and symbols.
1Tune to the preset station you want to name.
2Press NAME.
The cursor blinks in the display.
3Use + or – to select the character you desire.
4Press MENU </> to move the cursor into position for the next character.
5Repeat steps 3 and 4 to enter up to 8 characters.
6Press ENTER to store the names.
If you make a mistake
Press MENU </> repeatedly so that the character you want to change blinks in the display, then use + or – to select the desired character.
To display index names
Press DISPLAY repeatedly to display index names and program source (or frequency if you select TUNER).
Notes
•You can also enter a name of up to 8 characters for program sources. Select the program source you want and repeat steps 2 to 6 (except 5.1 CH/DVD).
•To clear program source name, press NAME and then press the same program source button. Press ENTER to delete the name (except TUNER).
Receiver Operations
Recording
This receiver makes it easy to record to and from the components connected to the receiver. You don’t have to connect playback and recording components directly: once you select a program source on the receiver, you can record and edit as you normally would using the controls on each component.
Before you begin, make sure you’ve connected all components properly.
Function buttons
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
| Playback component |
| Recording component | |||||||||
| (program source) |
| (MD recorder, | |||||||||
|
|
|
|
|
|
| Tape deck, VCR) | |||||
l: Audio signal flow | ||||||||||||
|
|
|
|
| ||||||||
|
|
|
|
| ||||||||
.: Video signal flow |
|
|
|
|
|
Recording on a MiniDisc or audio tape
You can record on a MiniDisc or cassette tape using the receiver. See the instruction manual of your MD recorder or tape deck if you need help.
1Press one of the function buttons to select the program source.
2Set the component to be ready for playing. For example, insert a CD into the CD player.
3Insert a blank disc or tape into the recording deck and adjust the recording level, if necessary.
4Start recording on the recording deck and then start playing the component.
(continued)