Using Surround Sound

Getting the Most Out of Dolby Pro Logic Surround Sound

5Press +/– repeatedly until the center mode you want appears on the display. Select the center mode as follows:

If you have

Select

So that

To obtain the best possible Dolby Pro Logic Surround sound, first select the center mode according to the speaker system you have. Then, adjust each speaker volume and delay time.

Note that you must have at least one additional pair of speakers and/or one center speaker to do the following adjustments.

SOUND FIELD

 

 

SOUND FIELD

SET UP

 

 

MODE +/–

 

 

 

 

 

 

 

ON/OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LEVEL +/– MENU </>

Front and rear

NORMAL

The bass sound of the

speakers, and a

 

center channel is

small center

 

output from the front

speaker

 

speakers (because a

 

 

small speaker cannot

 

 

produce enough

 

 

bass).

 

 

 

Front and center

3 STEREO

The sound of the rear

speakers, no rear

(3 Channel

channel is output

speaker

Logic)

from the front

 

 

speakers.

 

 

 

Front and rear

PHANTOM

The sound of the

speakers, no

 

center channel is

center speaker

 

output from the front

 

 

speakers.

 

 

 

Front and rear

WIDE

The center channel

speakers, and a

 

fully reproduces the

large center

 

entire audio

speaker

 

spectrum.

 

 

 

Selecting the center mode

The receiver offers you four center modes: Phantom, Normal, Wide and 3 STEREO. Each mode is designed for a different speaker configuration. Select the mode that best suits your speaker’s system configuration:

1Press SOUND FIELD ON/OFF to turn on the sound field.

2Press SOUND FIELD MODE +/– repeatedly to select the Dolby surround sound field (PRO LOGIC or C.STUDIO mode).

3Press SET UP.

4Press MENU < or > repeatedly until “CTR MODE” appears on the display.

16GB