Sony STR-DE435 Using the Sleep Timer, 26GB, Recording on a video tape

Other Operations

Recording on a video tape

You can record from a TV or a LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See your VCR’s instruction manual if you need help.

1Press TV/LD to select the programme source.

2Set the component to be ready for playing. For example, turn on the TV and TV tuner.

3Insert a blank video tape into the VCR for recording.

4Start recording on the VCR.

You can replace audio while editing a video tape

At the point you want to start adding different sound, press another function button (for example, CD) and start playback. The sound from the selected component will be recorded over the original audio.

To resume recording the original sound, press the TV/ LD function button.

Note

You cannot record the audio and video signal during 5.1 CH/DVD mode.

26GB

Using the Sleep Timer

Using the controls on the remote, you can set the amplifier to turn off automatically at a time you specify.

SLEEP

>/.

Press SLEEP on the remote while the power is on. Each time you press SLEEP, the time changes as shown below.

n2:00:00 n1:30:00 n1:00:00 n0:30:00 nOFF

The display dims after you specify the time.

You can freely specify the time

Press SLEEP on the remote first, then specify the time you want using the cursor buttons (>or .).

The sleep time changes in 1 minute intervals. You can specify up to 5 hours.

You can check the time remaining before the amplifier turns off

Press SLEEP on the remote. The remaining time appears in the display.