Other Operations
Indexing Preset Stations and Programme Sources
You can enter a name of up to 8 characters for preset stations (station index) and programme sources. These index names (for example, “VHS”) appear in the receiver's display when a station or programme source is selected. This function is useful for distinguishing components of the same kind. It is also handy for identifying components connected to jacks meant for another type of component, for example, a second CD player connected to the MD/TAPE jacks.
Notes
•Not more than one name can be entered for each preset station or programme source.
•You cannot index FM RDS stations or components connected to the 5.1 CH/DVD jacks.
1To index a preset station.
Tune to the preset station you want to name.
To index a programme source.
Select the programme source (component) to be named, then go to Step 2.
2Press NAME.
The cursor blinks in the display.
3Use + or – to select the character you desire.
4Press MENU < or > to move the cursor into position for the next character or previous character.
5Repeat Steps 3 and 4 to enter up to 8 characters.
6Press ENTER to store the names.
If you make a mistake
Press MENU < or > repeatedly so that the character you want to change blinks in the display, then use +
or – to select the desired character.
To assign index names to other stations
Repeat Steps 2 to 4.
To clear programme source name
Press NAME and then press the same programme source button. Press ENTER to delete the name (except TUNER).
Recording
This receiver makes it easy to record to and from the components connected to the receiver. You don’t have to connect playback and recording components directly: once you select a programme source on the receiver, you can record and edit as you normally would using the controls on each component.
Before you begin, make sure you’ve connected all components properly.
Function buttons
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
| Playback component |
| Recording component | |||||||||
| (programme source) |
| (MD deck, Tape deck, | |||||||||
|
|
|
|
|
|
| VCR) | |||||
•: Audio signal flow | ||||||||||||
|
|
|
|
| ||||||||
|
|
|
|
| ||||||||
c: Video signal flow |
|
|
|
|
| |||||||
Recording on a MiniDisc or audio tape
You can record on a MiniDisc or cassette tape using the receiver. See the instruction manual of your MD deck or tape deck if you need help.
1Press one of the function buttons to select the programme source.
2Set the component to be ready for playing. For example, insert a CD into the CD player.
3Insert a blank disc or tape into the recording deck and adjust the recording level, if necessary.
4Start recording on the recording deck and then start playing the component.
(continued)