Sony STR-DE545 - page 21

21

Hooking Up and Setting Up the Speaker System

There’s no sound from a specific component.

,Check that the component is connected correctly to

the audio input jacks for that component.

,Check that the cord(s) used for the connection is

(are) fully inserted into the jacks on both the

receiver and the component.

No sound is heard from one of the front

speakers.

,Connect a pair of headphones to the PHONES jack

and set the SPEAKERS selector to OFF to verify

that sound is output from the headphones (see “7

SPEAKERS selector” and “PHONES jack” on page

23).

If only one channel is output from the headphones,

the component may not be connected to the

receiver correctly. Check that all the cords are fully

inserted into the jacks on both the receiver and the

component.

If both channels are output from the headphones,

the front speaker may not be connected to the

receiver correctly. Check the connection of the front

speaker which is not outputting any sound.

If you encounter a problem that is not included above, see

“Troubleshooting” on page 45.

Contents

Main WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. INFORMATION CAUTION Note to CATV system installer: TABLE OF CONTENTS Hooking Up the Components 4 Hooking Up and Setting Up the Speaker System 12 Location of Parts and Basic Operations 22 Enjoying Surround Sound 27 Hooking Up the Components Unpacking Inserting batteries into the remote z Before you get started Antenna Hookups ANTENNA FM 75 COAXIAL Notes on antenna hookups Ground wire (not supplied) To ground Audio Component Hookups IN OUT CD player Jacks for connecting audio components Digital Component Hookups Example of LD player connected via an RF demodulator RF demodulator LD player DIGITAL DVD/LD IN (COAXIAL) or (OPTICAL) * 5.1CH Input Hookups Two for the 5.1CH INPUT FRONT and REAR jacks Monaural audio cords (not supplied) Two for the 5.1CH INPUT CENTER and WOOFER jacks Video cord (not supplied) b AC power cord To a wall outlet AC OUTLET Control A1 connecting cord (not supplied) (STR-DE545 and STR-SE501 only) CONTROL A1 hookup (STR-DE545 and STR-SE501 only) AUX AUDIO IN hookup Connecting the AC power cord MULTI CHANNEL DECODING ? / 1 Hooking Up and Setting Up the Speaker System Jog dial Brief descriptions of buttons and control used to set up the speaker system Cursor buttons Speaker System Hookup Hooking Up and Setting Up the Speaker System INPUT Center speaker AUDIO IN Speaker impedance (STR-DE545 and STR-SE501 only) Speaker System Hookup To avoid short-circuiting the speakers To avoid damaging your speakers Performing Initial Setup Operations Before turning on the receiver Clearing the receivers memory 1 2 Performing initial setup operations Multi Channel Surround Setup z Multi Channel Surround Setup z Adjusting the speaker volume 2 3 4 z Before turning on the receiver Before You Use Your Receiver z Page Front Panel Parts Descriptions Location of Parts and Basic Operations Page 8!@! Front Panel Parts Description !! ! !9 ! !! @@@@! Page Front Panel Parts Description Enjoying Surround Sound Selecting a Sound Field 1 2 z Brief descriptions of buttons used to enjoy surround sound Sound field information Sound field Effect Notes Selecting a Sound Field Sound field information Sound field Effect Notes Notes Use the buttons on the front panel to operate the following modes Understanding the Multi-Channel Surround Displays Recording Notes 1/0 2/0* 3/0 2/1 3/1 2/2 3/2 2/0** DOLBY DIGITAL [1/0] DTS [1/0] DOLBY PROLOGIC PCM XX kHz*** Customizing Sound Fields To get the most from multi channel surround sound Adjusting the surround parameters 2 Adjusting the level parameters 2 Adjusting the bass/treble 5 z Resetting customized sound fields to the factory settings 1 2 z Adjustable parameters for each sound field Customizing Sound Fields Receiving Broadcasts This chapter describes how to receive FM or AM broadcasts and how to preset selected stations. Receiving Broadcasts Brief descriptions of buttons used to receive broadcasts STR-DE445 only Numeric buttons D.TUNING DVD/LD Direct Tuning 2 3 4 5 6 z Preset Tuning Presetting radio stations 2 3 4 Other Operations Brief descriptions of buttons that appear in this chapter Cursor buttons Naming Preset Stations and Program Sources 1 2 3 4 5 Using the Sleep Timer z Adjustment Using the SET UP Button Troubleshooting Additional Information Reference sections for clearing the receivers memory Troubleshooting Specifications AUDIO POWER SPECIFICATIONS Amplifier section FM tuner section Specifications AM tuner section Video section General Glossary Press and light Press or to select Turn jog dial to select See page Settings Using SUR, LEVEL, BASS/TREBLE, and SET UP buttons Remote Button Description (STR-DE445 only) Remote Button Operations Function Changing the factory setting of a function button Remote Button Description (STR-DE445 only) 1 2 Index A B C D