Multi channel surround setup (continued)

When placing surround speakers behind you

B

A A

45°

C

C

90°

20°

Note

Do not place the center speaker farther away from the listening position than the front speakers.

Normal Speaker and Micro Satellite Speaker

If you are using

Select

Normal Speakers

NORM. SP.

 

 

Micro Satellite Speakers

MICRO SP.

 

 

The speaker size and the sub woofer selection has been preset to NORM. SP. You can adjust the speaker size and sub woofer selection when you select NORM. SP. (pages 17-18)

To select MICRO SP., turn off the power, then turn on again while pressing LEVEL. (To reset to NORM. SP., do the same procedure.)

When you select MICRO SP., the speaker size and sub woofer selection has been configurated as follows:

Speaker

Settings

FRONT

SMALL

 

 

CENTER

SMALL

 

 

SURROUND

SMALL

 

 

SUB WOOFER

YES

 

 

You cannot change the configuration if you select

MICRO SP.

Tip

The setting for Micro Satellite Speaker (MICRO SP.) has been programmed to optimize the sound balance. If you use Sony’s Micro Satellite Speakers, select

MICRO SP.

Caution

When you use Micro Satellite Speakers and the speaker size is set to “LARGE”, you may not obtain the correct soundstage. The speaker may also be damaged at high volume position.

Specifying the speaker parameters

1 Press SET UP.

2 Press MENU or MENU to select

the parameter you want to adjust.

3 Press MENU + or MENU – to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 until you have set all of the parameters that follow.

Initial settings

Parameter

Initial setting

L

R

(FRONT)

LARGE*

C

(CENTER)

LARGE*

SL

SR

(SURROUND)

LARGE*

SW (SUB WOOFER) S.W. XXX

YES*

L

R DIST. XX.X m (ft.)**

5.0 m (16 ft.)**

C DIST. XX.X m (ft.)**

5.0 m (16 ft.)**

SL

SR DIST. XX.X m (ft.)**

3.5 m (11 ft.)**

SL

SR

PL. XXX

BEHD.

SL

SR

HGT. XXX

LOW

*You can set this parameter only when you select NORM. SP.

**Models of area code U, CA only.

16GB