Sony DE485, DE485E, STR-DE585 52GB, Specifications

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 8 ohm loads, both channels driven, from 40 – 20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than

0.09% total harmonic distortion from 250 milliwatts to rated output (STR-DE485 area code U only).

Amplifier section

POWER OUTPUT

Models of area code U, CA

Rated Power Output at Stereo Mode (8 ohms 40 Hz – 20 kHz, THD 0.09 %)

STR-DE585*:	100 W + 100 W
STR-DE485:	80 W + 80 W

Reference Power Output (8 ohms 1 kHz, THD 0.7 %)

STR-DE585*:	FRONT1):100 W/ch
	CENTER1): 100 W
	SURR1): 100 W/ch
STR-DE485:	FRONT1): 80 W/ch
	CENTER1): 80 W
	SURR1): 80 W/ch

* Models of area code CA only.

Models of area code CEL,CEK Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)

STR-DE585:	100 W + 100 W2)
STR-DE485E:	80 W + 80 W2)

Reference Power Output2) (8 ohms 1 kHz, THD 0.7 %)

STR-DE585:	FRONT1):100 W/ch
	CENTER1): 100 W
	SURR1): 100 W/ch
STR-DE485E:	FRONT1): 80 W/ch
	CENTER1): 80 W
	SURR1): 80 W/ch

Models of other area code

Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)

STR-DE485: 80 W + 80 W2)

Reference Power Output2) (8 ohms 1 kHz, THD 10 %)

STR-DE485:FRONT1): 100 W/ch

CENTER1): 100 W

SURR1): 100 W/ch

1)Depending on the sound field settings and the source, there may be no sound output.

2)Measured under the following conditions:

	Area code	Power requirements
	E2/E3, AU	240 V AC, 50 Hz
	SP, CEL, CEK, AR	230 V AC, 50 Hz
	TW	110 V AC, 60 Hz
	MX	120 V AC, 60 Hz
Frequency response
MULTI CH IN		10 Hz – 50 kHz
(STR-DE 585 and		+0.5/–2 dB (with sound
STR-DE485 only),		field, and tone bypassed)
CD, MD/TAPE, DVD/
LD, VIDEO 1, 2
Inputs (Analog)
MULTI CH IN		Sensitivity: 250 mV
(STR-DE 585 and		Impedance: 50 kilohms
STR-DE485 only),		S/N3): 96 dB
CD, MD/TAPE, DVD/		(A, 250 mV4))
LD, VIDEO 1, 2

3)INPUT SHORT (with sound field and tone bypassed).

4)Weighted network, input level.

Inputs (Digital)

DVD/LD (Coaxial)	Sensitivity: –
	Impedance: 75 ohms
	S/N: 100 dB
	(A, 20 kHz LPF)
VIDEO 2 (Optical)	Sensitivity: –
	Impedance: –
	S/N: 100 dB
	(A, 20 kHz LPF)
Outputs
MD/TAPE (OUT),	Voltage: 250 mV
VIDEO 1	Impedance: 10 kilohms
(AUDIO OUT)
SUB WOOFER	Voltage: 2 V
	Impedance: 1 kilohms
Tone
Gain levels:	±6 dB, 1 dB step
FM tuner section
Tuning range	87.5 - 108.0 MHz
Antenna terminals	75 ohms, unbalanced

Intermediate Frequency

10.7 MHz

52GB