Other Operations

Naming preset stations and inputs

You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver’s display. Use the buttons on the receiver for the operation.

1 To index a preset station

Press TUNER FM/AM repeatedly to select the FM or AM band, then tune in the preset station you want to create an index name for (page 26).

To index an input

Press the input button to select the input you want to create an index name for.

2

Press MAIN MENU repeatedly to select

3

“ CUSTOM

”.

Press or

repeatedly to select

4

“NAME IN”.

 

Press ENTER.

The cursor flashes and you can select a character.

5 Use or and –/+ jog dial to create an index name.

Turn the –/+ jog dial to select a character, then press > to move the cursor to the next position.

Tips

•You can select the character type as follows by turning the –/+ jog dial.

Alphabet (upper case) t Numbers t Symbols

•To enter a blank space, turn the –/+ jog dial until a blank space appears in the display.

•If you made a mistake, press < or > repeatedly until the character you want to change flashes, then turn the –/+ jog dial to select the correct character.

6 Press ENTER to store the index name.

Note (Models of area code CEL, CEK only)

When you name an RDS station and tune in the station, the Program Service name appears instead of the name you entered. (You cannot change the name of a Program Service name. The name you entered will be overwritten by the Program Service name.)

42GB