Tuning range | 87.5 - 108.0 MHz |
Antenna | FM wire antenna |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Useable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
Tuning range |
|
|
Models of area code U, CA | – 1,710 kHz6) | |
With | 530 | |
With | 531 | – 1,710 kHz6) |
Models of area code E2/E3 |
| – 1,610 kHz6) |
With | 530 | |
With | 531 | – 1,602 kHz6) |
Models of area code CEL, CEK, AU | ||
With | 531 | – 1,602 kHz |
Models of area code AR |
|
|
With | 530 | – 1,610 kHz |
Antenna | Loop antenna | |
Intermediate frequency | 450 kHz | |
Usable sensitivity | 50 dB/m (at 1,000 kHz or | |
| 999 kHz) | |
S/N | 54 dB (at 50 mV/m) | |
Harmonic distortion | 0.5% (50 mV/m, 400 Hz) | |
Selectivity |
|
|
At 9 kHz: | 35 dB | |
At 10 kHz: | 40 dB |
6)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video sectionInputs/Outputs |
|
Video: | 1 |
Y: 1 | |
| C: 0.286 |
COMPONENT VIDEO: Y: 1
| |
| 75 ohms |
| |
| 75 ohms |
| 80 MHz HD Pass Through |
General |
|
Power requirements |
|
|
|
Area code | Power requirements |
|
|
U, CA | 120 V AC, 60 Hz |
|
|
CEL, CEK | 230 V AC, 50/60 Hz |
|
|
AU | 240 V AC, 50 Hz |
|
|
AR | 220 – 230 V AC, 50/60 Hz |
|
|
E2/E3 | 120/220/240 V AC, |
| 50/60 Hz |
|
|
Power consumption |
|
|
|
Area code | Power consumption |
|
|
U, CEL, CEK, AU, | 230 W |
E2/E3, AR |
|
|
|
CA | 310 VA |
| |
Power consumption (during standby mode) | |
| 0.2 W |
AC outlets |
|
(Except for models of area code AR) | |
|
|
Area code | AC outlets |
|
|
U, CA | 1 switched, 120 W/1A |
| MAX |
|
|
CEL, CEK, E2/E3, AU | 1 switched, 100 W MAX |
| |
Dimensions (w/h/d) (Approx.) | |
| 430 × 157.5 × 370 mm |
| (16 7/8 × 6 2/8 × 14 4/8 |
| inches) |
| including projecting parts |
| and controls |
Mass (Approx.) | 9.0 kg (19 lb 14 oz) |
FM wire antenna (1)
AM loop antenna (1)
Remote commander
R6
For details on the area code of the component you are using, see page 3.
Design and specifications are subject to change without notice.