Broadcasts Receiving

Preset Tuning

Tuning to preset stations

You can tune the preset stations either of the following two ways.

Scanning the preset stations

1Press TUNER to light the button up.

The last received station is tuned in.

2Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want.

Each time you press the button, the receiver tunes in one preset station at a time, in the corresponding order and direction as follows:

nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N￿

nC0˜...C2˜C1N

Using the preset codes

Use the supplied remote to perform the following operations. For details on the buttons used in this section, see the operating instructions for the supplied remote.

1Press TUNER to light the button up.

The last received station is tuned in.

2Select the preset station you want from the list displayed on the supplied remote when TUNER is selected.

46