Adjustments Using the SET UP Button
Operations Other
The SET UP button allows you to make the following adjustments.
Selecting the 5.1CH video input
This parameter lets you specify the video input to be used with the audio signals from the 5.1CH INPUT jack.
The 5.1CH video input is set to DVD/LD by default.
1Press SET UP.
2 Press the cursor buttons ( or ) to select “5.1CH V:”.
3Turn the jog dial to select the video input you desire.
Adjusting the Control A1 auto function
Turning on the Control A1 auto function parameter lets you turn Sony components connected via Control A1 cords (see page 13) on automatically when you press the corresponding function button.
Auto function is set to ON by default.
1Press SET UP.
2 Press the cursor buttons ( or ) to select “AUTO FUNCTION.”
3Turn the jog dial to select “ON” or “OFF.”
Setting up the 2 way remote
This receiver is shipped from the factory with the 2 way remote control system set to “ON”. Normally, you can use the receiver as is.
However, if you want to use this receiver together with another component that is also compatible with the 2 way remote control system, be sure to perform the following operation to limit response to signals sent from the remote controls.
To use with the
Perform the following steps to turn OFF this unit’s 2 way remote control system. Also, be sure the
To use with other components that have the 
logo
Turn OFF the other component’s 2 way remote control system. For details, refer to the operating instructions suppled with your other components.
To use with Sony CD players
Turn OFF the remote control adapter switch on the
Also when using several 2 way remote control system components together, be sure to place them close together in order to enable proper remote operation.
1Press SET UP.
2Press the cursor buttons (
or 
) to select “2 WAY REMOTE”.
3Turn the jog dial to select “ON” or “OFF”.
50