48GB
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Left
STR-DH720
4-262-412-12(1)
• Some time may be needed to start playback
when:
– the folder structure is complex.
– the memory capacity is excessive.
• This receiver does not necessarily support
all the functions provided in a connected
USB device.
• The playback order for the receiver may
differ from the playback order of the
connected USB device.
• Folders that have no audio files are skipped.
• When playing a very long track, some
operations may cause playback delay.

USB message list

Recording using the

receiver

You can record from an audio equipment
(e.g., CD recorder) or video equipment
(e.g., VCR, DVD recorder) using the receiver.
Refer to the operating instructions supplied
with your recording equipment.
1Press one of the input buttons

to select the playback

equipment that you want to

record.

You can also use INPUT SELECTOR on
the receiver.
2Prepare the playback

equipment for playing.

Example 1 (audio recording):
Tune to the radio station you want to
record.
Example 2 (video recording):
Insert the video tape you want to copy
into the VCR.
3Prepare the recording

equipment.

Example 1 (audio recording):
Insert a blank CD-R into the CD recorder
and adjust the recording level.
Example 2 (video recording):
Insert a blank video tape, etc. into the
recording equipment (connected to
VIDEO 1 OUT jacks) for recording.
4Start recording on the

recording equipment, then start

the playback equipment.

Notes
•Some sources contain copyright protection to
prevent recording. In this case, you may not be able
to record from the source.
•Only analog input signals are output from the
analog output jack (for recording).
•HDMI sound cannot be recorded.
•While only composite video signals are being
recorded, the auto standby function of the receiver
may start up and interrupt the recording. In this
case, set the “Auto Standby” to “OFF” (page 69).
Message and explanation
Reading
The receiver is recognizing and reading information
of the USB device.
Device Error
The memory of the USB device could not be
recognized (page 46).
No Support
An unsupported USB device is connected, an
unknown device is connected, or the
USB device is connected through a USB hub
(page 46).
No Device
No USB device is connected.
No Track
No track was found.