Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-DN1030 iPod/iPhone section, USB section, NETWORK section, Bluetooth section, General, Design and specifications are subject to change without notice., Halogenated flame retardants are not used in the certain printed wiring boards.

1 132

Download 132 pages, 10.98 Mb

128US

D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF

04\4420297141_US\US07ADD_STR-DN1030-CEL.fm

masterpage: Left

STR-DN1030

4-420-297-14(1)

iPod/iPhone section

DC 5V 1.0 A MAX

USB section

Supported bit rate* MP3 (MPEG 1 Audio

Layer-3):

32 kbps – 320 kbps, VBR

WMA: 48 kbps – 192 kbps

AAC: 48 kbps – 320 kbps

* Compatibility with all

encoding/writing

software, recording

devices and recording

media cannot be

guaranteed.

Transfer speed Full-speed

Supported USB device

Mass Storage Class

Maximum current 500 mA

NETWORK section

Ethernet LAN 10BASE-T/100BASE-TX

Wireless LAN

Compatible standards:

IEEE 802.11 b/g

Security: WEP 64 bit, WEP 128 bit,

WPA/WPA2-PSK (AES),

WPA/WPA2-PSK (TKIP)

Radio frequency: 2.4 GHz

Bluetooth section

Communication system

Bluetooth Specification

version 2.1 + EDR

(Enhanced Data Rate)

Output Bluetooth Specification

Power Class 2

Maximum communication range

Line of sight approx.

10 m1)

Frequency band 2.4 GHz band

(2.4000 GHz – 2.4835 GHz)

Modulation method FHSS (Freq Hopping

Spread Spectrum)

Compatible Bluetooth profiles2)

A2DP (Advanced Audio

Distribution Profile)

AVRCP 1.3 (Audio Video

Remote Control Profile)

Supported Codecs3) SBC4)

Transmission range (A2DP)

20 Hz – 20,000 Hz

(Sampling frequency

44.1 kHz)

1)The actual range will vary depending on factors

such as obstacles between devices, magnetic fields

around a microwave oven, static electricity,

cordless phone, reception sensitivity, antenna’s

performance, operating system, software

application, etc.

2)Bluetooth standard profiles indicate the purpose of

Bluetooth communication between devices.

3)Codec: Audio signal compression and conversion

format

4)Subband Codec

General

Power requirements

Power consumption 240 W

Power consumption (during standby mode)

0.3 W (When Control for

HDMI, Network Standby,

and Bluetooth Standby are

set to off, and the receiver

in zone 2 is turned off.)

Dimensions (width/height/depth) (Approx.)

430 mm × 158 mm ×

322.6 mm (17 in ×

6 1/4 in × 12 3/4 in)

including projecting parts

and controls

Mass (Approx.) 8.8 kg (19 lb 7 oz)

Design and specifications are subject to

change without notice.

Area Power requirements

USA, Canada 120 V AC, 60 Hz

Mexico 127 V AC, 60 Hz

Brazil 127 V AC – 220 V AC,

60 Hz

Halogenated flame retardants are not used in

the certain printed wiring boards.

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION For customers in Canada About This Manual On copyrights Page FLAC Decorder Table of Contents Connections Preparing the Receiver Basic Operations Tuner Operations BRAVIA Sync Features Other Operations Adjusting Settings Using the Remote Control Additional Information Supplied accessories Inserting batteries into the remote control Description and location of parts Front panel qfqgqh qaqd qs ql qk qj Indicators on the display panel 1235 4 6 57 qa08 9 qgqhw;ws qjqkwa qlwf wdwgwh qf qd qs Page Rear panel 566 78 1243 Remote control Page Page Page To control other Sony equipment B D F H I J Getting started Notes on converting video signals To connect a recording equipment Function for conversion of video signals Digital audio formats supported by the receiver 1: Installing the speakers Connections Example of speaker system configuration 5.1 channel speaker system 7.1 channel speaker system using surround back speakers 7.1 channel speaker system using front high speakers 2: Connecting the speakers Bi-amplifier connection 3: Connecting the TV To enjoy the TV broadcast in multi channel surround sound from the receiver To listen to the sound from the TV 4a: Connecting the video HDMI features Using HDMI connection Notes on HDMI connections When connecting cords If you want to connect several digital equipment, but cannot find an unused input Converting video signals Connecting a Blu-ray Disc player, DVD player Connecting a satellite tuner, cable TV tuner Connecting a PlayStation 3 Connecting an iPod, iPhone for video contents Connecting a DVD recorder, VCR Connecting a Camcorder, Video game, PC 4b: Connecting the audio Connecting a Super Audio CD player, CD player A AAudio cord (not supplied) 5: Connecting the antennas (aerials) Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead). A Connecting an iPod, iPhone, USB device AUSB cable (not supplied) 6: Connecting to the network System requirements AFor a wired LAN connection only. BFor a wireless LAN connection only. Configuration example A B Setting the voltage selector Connecting the AC power cord (mains lead) Initializing the receiver 1 receiver. Setting the speakers 2 3 4 5 4 SB Assign, then press or b. 5 the parameter you want, then 6 1 (page 38). 2 microphone to the AUTO CAL MIC jack. 3 Confirm active subwoofer setup Settings, then press or b. Performing Auto Calibration 3 Auto Cal., then press or b. 4 Start, then press . 5 6 10 microphone from the receiver. To cancel Auto Calibration Press V/v to select Warning in step 7 in Performing Auto Calibration (page 42) then press When Error Code appears Configuring the network settings of the receiver Using a wireless LAN connection Searching for an access point and setting up a wireless network (Access Point Scan method) 2 3 4 5 6 10 Do Not Use, then press . When using a proxy server 11 OK, then press . 1 Using a wired LAN connection 2 Auto, then press . Using the menu When using a fixed IP address 3 2 3 menu you want, then press or b to enter the menu. 4 the menu item you want to adjust, then press to enter the menu item. 2 3 4 5 To exit the option menu 2 Basic Operations 3 Naming the input (Name Input) 4 start playback. 5 3 press or b. 4 character, then press b. 5 Playing an iPod/iPhone Compatible iPod/iPhone models 2 3 4 1 2 3 To select the playback mode 1 2 Selecting the iPod/iPhone control mode Operating the iPod/iPhone using System GUI mode Operating the iPod/iPhone using iPod mode 3 using iPod/iPhone menu. iPod/iPhone message list To operate the iPod/iPhone Notes on iPod/iPhone Playing a USB device Notes Compatible USB devices 2 or b. 3 4 To select the playback mode To operate the USB device Recording using the receiver 1 2 equipment. 3 Listening to FM/AM radio Tuner Operations 2 1 2 In case of poor FM stereo reception 1 2 3 If you cannot tune to a station 1 2 Tuning to a station automatically (Auto Tuning) Tuning to a station directly (Direct Tuning) Changing the AM tuning scale Presetting FM/AM radio stations (Preset Tuning) 1 3 4 Selecting the sound field 2 channel sound mode Press SOUND FIELD +/ repeatedly to select the sound field you want. x2CH ST. (2ch Stereo) xA. DIRECT (Analog Direct) Music mode xPLII MV (PLII Movie) xPLIIx MV (PLIIx Movie) xPLIIz (PLIIz Height) xNEO6 CIN (Neo:6 Cinema) xPLIIz (PLIIz Height) xNEO6 MUS (Neo:6 Music) xHP 2CH (HP (2CH)) xHP DIRECT (HP (Direct)) Using the Sound Optimizer function Press SOUND OPTIMIZER to select S. OPT. ON. Using the Advanced Auto Volume function Press AMP, then press AUTO VOL to select A. VOL ON. Resetting sound fields to the default settings Using Network Features 1 receiver. 2 Setting up the server 1 When using Windows 7 2 and tasks] under [Network and Internet]. 5 6 7 8 9 Page 12 To refresh the server list 1 2 To delete a server from the server list 1 2 or b. 3 4 the content you want to play back. Enjoying Sony Entertainment Network (SEN) Note The menu is displayed on the TV screen. 2 or b. 4 3 5 1 preset. 2 then press ENT/MEM. 3 Using the PARTY STREAMING function Starting a PARTY 1 devices are turned on and ready to join a PARTY. 2 Streaming music from iTunes with AirPlay Compatible iPod/iPhone/iPad models Joining a PARTY 1 2 3 To confirm/edit the device name To control AirPlay playback Updating the software 2 press or b. 3 4 8 To cancel the procedure To go back to the previous screen Network features message list Using Network Features SEN Software update Searching for an item using a keyword 1 2 3 4 About the Bluetooth wireless technology About the Bluetooth functions of the receiver Listening to music of a Bluetooth device Using Bluetooth Features Communication System and Compatible Bluetooth Profiles of this receiver 1 2 3 4 5 1 Bluetooth function. 2 the Bluetooth device. 3 What is BRAVIA Sync? Preparing for the BRAVIA Sync BRAVIA Sync Features If your TV is compatible with the Control for HDMI-Easy Setting function 1 2 Playing back equipment with one-touch operation (One-Touch Play) Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) Turning off the receiver with the TV (System Power-Off) Press TV, then press AV ?/1. Enjoying optimum sound field for the selected scene Correspondence table (Scene Select) Operating the receiver using the TVs remote control (Home Theatre Control) Switching between digital and analog audio (INPUT MODE) or b. 1 receiver to select the input. 3 4 5 6 7 Using a bi-amplifier connection 2 3 4 5 Page 1 Press ZONE, then press ?/1. receiver). 2 3 The remote control switches to zone 2. Using the Settings menu Settings menu list The menu is displayed on the TV screen. 2 menu, then press or b to enter the menu mode. Speaker Settings menu xSP Pattern (Speaker Pattern) xSB Assign (Surround back speaker assign) xManual Setup To adjust the speaker level To adjust the size of each 1 2 3 xCrossover Freq (Speaker crossover frequency) 1 Surround Settings menu To adjust the effect level for HD-D.C.S. 1 2 EQ Settings menu Audio Settings menu xD.L.L. (Digital Legato Linear) xA/V Sync (Synchronizes audio with video output) xDual Mono (Digital broadcast language selection) HDMI Settings menu xCtrl for HDMI (Control for HDMI) xPass Through xAudio Out Network Settings menu To check the network information 1 2 xPARTY STREAMING 1 2 xAccess Settings Page xNetwork Standby 1 2 xSoftware Update Bluetooth Settings menu xPairing xBT Standby (Bluetooth Standby) 1 2 xClear History System Settings menu xAuto Standby Operating without connecting to a TV 1 2 3 4 5 Overview of the menus Adjusting Settings Page To view the information on the display panel 1 2 Programming the remote 1 press AV ?/1. 2 equipment you want to program. 3 enter the numeric code. To control a DAT deck 4 5 To control a tape deck To control an MD deck To control a PSX To control an HDD recorder To control a Blu-ray Disc player/ recorder To control a DVD player To control a TV To control an LD player To control a Video CD player Using the Remote Control To control a VCR To control a satellite tuner (box) To control a cable box Resetting the remote Additional Information 1 VOL or 2 , press and hold ?/1, then press AV ?/1. 2 On placement On operation On cleaning On Bluetooth communication Troubleshooting Power Image Sound Page Page Tuner iPod/iPhone USB device Network connection Home Network Page 2 AirPlay SEN Bluetooth device BRAVIA Sync (Control for HDMI) Remote control Error messages Specifications AUDIO POWER SPECIFICATIONS (USA model only) Clearing the memory About support information Additional Information FM tuner section AM tuner section Video section HDMI Video iPod/iPhone section USB section NETWORK section Bluetooth section General Index Numerics A B C M N O P R END-USER LICENSE AGREEMENT FOR SONY SOFTWARE SONY SOFTWARE LICENSE GRANT OF LICENSE DESCRIPTION OF REQUIREMENTS, RESTRICTIONS, RIGHTS AND LIMITATIONS HIGH RISK ACTIVITIES 2012 Sony Corporation Printed in Malaysia EXCLUSION OF WARRANTY ON SONY SOFTWARE LIMITATION OF LIABILITY EXPORTS GOVERNING LAW