84US
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF
04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm
masterpage: Left
STR-DN1030
4-420-297-14(1)
What is “BRAVIA” Sync?
The “BRAVIA” Sync function allows
communication between Sony products such
as TV, Blu-ray Disc/DVD player, AV
amplifier, etc. that supports the Control for
HDMI function.
By connecting Sony equipment that is
compatible with the “BRAVIA” Sync with an
HDMI cable (not supplied), operation is
simplified as follows:
• One-Touch Play (page 85)
• System Audio Control (page 86)
• System Power-Off (page 86)
• Scene Select (page 87)
• Home Theatre Control (page 87)
Control for HDMI is a mutual control function
standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-
Definition Multimedia Interface).
We recommend that you connect the receiver
to products featuring “BRAVIA” Sync.
Notes
• You may use “One Touch Play”, “System Audio
Control”, and “System Power-Off” function with
non-Sony equipment. However, compatibility with
all non-Sony equipment is not guaranteed.
• “Scene Select” and “Home Theatre Control”
features are Sony proprietary functions. They
cannot operate with non-Sony equipment.
• Equipment not compatible with “BRAVIA” Sync
cannot activate these features.
Preparing for the
“BRAVIA” Sync
The receiver is compatible with the “Control
for HDMI-Easy Setting” function.
• If your TV is compatible with the “Control
for HDMI-Easy Setting” function, you can
set the Control for HDMI function of the
receiver and playback equipment
automatically by setting the Control for
HDMI function on your TV (page 84).
• If your TV is not compatible with the
“Control for HDMI-Easy Setting” function,
set the Control for HDMI function of the
receiver, playback equipment and TV
individually (page 85).
If your TV is compatible with the
“Control for HDMI-Easy Setting”
function
1Connect the receiver, TV and playback
equipment via HDMI connection
(page 26, 27).
(The respective equipment must be
compatible with the Control for HDMI
function.)
2Turn on the receiver, TV and playback
equipment.
3Turn on the Control for HDMI function
of the TV.
The Control for HDMI function of the
receiver and all the connected equipment
are turned on simultaneously. During the
setup, “SCANNING” flashes on the
display panel. Wait until “COMPLETE”
appears. The setup is complete.
For details on setup of the TV, refer to the
operating instructions of your TV.