66GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Left
STR-DN610
4-167-824-13(1)
You can select the sound field you want for
your listening pleasure.
xS.F. SELCT
Lets you select the sound field you want. For
details, see “Enjoying Surround Sound”
(page 44).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select “HALL” for the
DVD input, then change to a different input and then
return to DVD, “HALL” will automatically be
applied again.
xEFFECT
Lets you adjust the “presence” of the surround
effect for the Cinema Studio EX A/B/C sound
fields.
You can adjust the tonal quality (bass/treble
level) of the front speakers.
xBASS
xTREBLE
Notes
These parameters do not work in the following
cases:
– signals with sampling frequency of more than
48 kHz are being received.
– the multi channel Linear PCM signals are received
via an HDMI IN jack.
– Analog Direct is selected.
You can set the FM station receiving mode and
name the preset stations.
xFM MODE
•STEREO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
xNAME IN
Lets you set the name of preset stations. For
details, see “Naming preset stations”
(page 43).
You can make settings for the audio to suit
your preference.
xA/V SYNC
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
• SYNC ON (Delay time: 60 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• SYNC OFF (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma TV or a projector.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter does not work in the following
cases:
– signals with a sampling frequency of more than
48 kHz is input.
– the multi channel Linear PCM signals are
received via an HDMI IN jack.
– Analog Direct function is selected.