65GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right
STR-DN610
4-167-824-13(1)
Advanced Operations

xSB ASGN

• SPK B
If you connect an additional front speaker
system to the SPEAKERS SURROUND
BACK/BI-AMP/FRONT B terminals, select
“SPK B”.
• BI-AMP
If you connect front speakers to the
SPEAKERS SURROUND BACK/
BI-AMP/FRONT B terminals using a
bi-amplifier connection, select “BI-AMP”.
•OFF
If you connect surround back speakers to the
SPEAKERS SURROUND BACK/
BI-AMP/FRONT B terminals, select “OFF”.
Note
When you change the connection from bi-amplifier
or speaker front B to surround back speakers
connection, set “SB ASGN” to “OFF”, then perform
the Auto Calibration again (page 33).

xFL DIST.

xFR DIST.

Lets you set the distance from your listening
position to the front speakers.
If both front speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.

xCNT DIST.

Lets you set the distance from your listening
position to the center speaker.

xSL DIST.

xSR DIST.

Lets you set the distance from your listening
position to the surround speakers.

xSB DIST.

xSBL DIST.

xSBR DIST.

Lets you set the distance from your listening
position to the surround back speakers.

xSW DIST.

Lets you set the distance from your listening
position to the subwoofer.
Notes
• Depends on the speaker pattern setting. Some
parameters may not be available.
• These parameters do not work in the following
cases:
– signals with a sampling frequency of more than
48 kHz are being received.
– the multi channel Linear PCM signals are
received via an HDMI IN jack.
– Analog Direct is selected.

xDIST.UNIT

Lets you select the unit of measure for setting
distances.
• METER
The distance is displayed in meters.
• FEET
The distance is displayed in feet.

xFRT CRS.

Lets you set the bass crossover frequency of
the front speakers that have been set to
“SMALL” in the SPEAKER menu.

xCNT CRS.

Lets you set the bass crossover frequency of
the center speaker that have been set to
“SMALL” in the SPEAKER menu.

xSUR CRS.

Lets you set the bass crossover frequency of
the surround speakers that have been set to
“SMALL” in the SPEAKER menu.