Ricoh IS 2060 Troubleshooting, If Your Machine Does Not Operate as You Want, Messege, Cause

4. Troubleshooting

If Your Machine Does Not Operate as You Want

When a Message is Displayed

The following chart contains explanations for the common messages. If other messages appear, follow the instructions as they are displayed.

Messege	Cause	Action
Cannot detect original size.	The size of the originals	Place the original on the exposure
	placed is difficult to detect.	glass. ⇒ p.11 “Placing Originals on
	⇒ p.7 “Sizes difficult to de-	the Exposure Glass”
	tect”
		If the original size is difficult to de-
		tect, select the paper size manually.
		Do not use Auto Reduce/Enlarge mode.
	Original is not placed.	Place your originals.
Check original orientation.	There is no copy paper that	Place the original in the same direc-
	is in the same direction as	tion as the copy paper.
	the originals.
Check paper size.	Improper paper size is set.	If you press the {Start}key, copy
		will start onto the selected paper.
Rotate Sort is not available	A size of paper for which	Select the proper paper size. ⇒ p.32
with this paper size.	Rotate Sort is not available	“Sort”
	is selected.
It is over stapling capacity.	The number of sheets per set	Check the stapler capacity. ⇒ p.35
	is over the staple capacity.	“Staple”
Cannot staple paper of this	The Staple function cannot	Select a paper size that can be used
size.	be used with paper size se-	in Staple mode. ⇒ p.35 “Staple”
	lected.
Duplex is not avilable with	A paper size not available	Select the proper paper size.
this paper size.	in Duplex mode has been
	selected.
Maximum number of sets	The number of copies ex-	You can change the maximum copy
is *.	ceeds the maximum copy	quantity. ⇒ p.101 “Max. Copy
	quantity.	Quantity”
Cannot copy. Original is	The Document Server func-	To cancel the job in process, press the
being scanned by other	tion is in use.	[Exit] key, and then press the {Docu-
functions.		ment Server} key. Next, press the
		{Clear/Stop} key. When the message
		” [Stop] key was pressed. Stop stor-
		ing?” appears, press the [Stop] key.

85