Ricoh IS 2060 Changing the stamp position, Specify the first printing page and start number

Copy Functions

Changing the stamp position

APress the [Change] key.

BSelect the desired position, and then press the [OK] key.

Specify the first printing page and start number

If you selected (P1,P2…, -1-,-2-…, P.1, P.2…, 1, 2…, )

Note

❒Below explains the example when (P1, P2...) is selected. The steps are the same for /other cases.

APress the right [Change] key.

BPress the [First Printing Page] key, and then enter the original sheet number from which to start num- bering with the number keys.

Note

❒To change the number entered,

press the [Print Inquiry List] or {Clear/Stop} key, and then enter a new number.

CPress the {#}key.

DPress the [Numbering from/to] key, 2 and then enter the number from which to start numbering with

the number keys, then press the {#}key.

Note

❒The following is the example when the fist printing page is “2” and the first page number is “3”.

GCANPE2-2E

EPress the [Last Number] key, and then enter the page number at which to stop numbering with the number keys. , then press the {#} key.

Note

❒If you wish to print onto the last page, press the [to the end] key.

FWhen all the page designation is complete, press the [OK] key.

GPress the [OK] key.

73