Ricoh IS 2075, IS 2060 Batch mode, Sensors ASet the document guide to the original size

Placing Originals

1

1.Sensors

ASet the document guide to the original size.

BAlign the edges of the original and place it on the document feeder (ADF) with the side to be copied facing up.

Batch mode

In the batch mode, the machine cop- ies an original including more than 100 pages as one document, even if it is placed on the document feeder in parts.

Important

❒When placing special originals such as translucent paper, place them one by one.

APress the [Special Original] key.

1.Limit mark

2.Document guide

Note

❒Straighten curls in the original before placing it on the docu- ment feeder (ADF).

❒To prevent multiple sheets from being fed at once, fan the origi- nal before placing it on the doc- ument feeder (ADF).

❒Set the original squarely.

BSelect the [Batch] key, and then press the [OK] key.

Note

❒When [Batch] is not displayed, change the settings in ⇒ p.107 “Switch to Batch (SADF)”.

CPlace the first part of the original, then press the {Start}key.

DAfter the first part of the original has been fed, place the next part and then press the {Start}key.

Note

❒If you want to copy the subse- quent originals in this mode, re- peat step D.

EWhen the Sort, Combine or 1 Sid- ed → 2 Sided mode has been set, press the {#} key after all origi- nals have been scanned.

12